Currently unavailable
This product is not available at the moment. Check back later or explore other options below.
This Philips 800 Series Compact Air Purifier is designed for individuals and families seeking to improve indoor air quality by removing invisible viruses, allergens, and pollutants. Its key benefit is rapid and effective purification for rooms up to 49m², ensuring a cleaner and safer home environment with minimal noise. A potential caveat is the need for regular filter replacement, which incurs ongoing costs.
| Colour | White |
|---|---|
| Model Part Number | AC0820/10 |
| Brand | Philips |
The recommended HEPA filter lifetime is approximately 12 months. However, this can vary based on your home's air quality and how often the purifier is used. The smart filter indicator will alert you when it's time for a replacement.
The color ring provides a visual indication of your indoor air quality. It shows the level of allergens and PM2.5 particles. Typically, blue indicates good air quality, while purple and red indicate progressively poorer air quality.
Yes, the Philips 800 Series air purifier is designed to filter out up to 99.9% of viruses and aerosols from the air, including those that may carry respiratory viruses. It has been tested for effectiveness against viruses and coronavirus.
In sleep mode, the air purifier operates very quietly, with a noise level of approximately 35 dB. The display lights are also dimmed for an undisturbed sleep environment.
The Clean Air Delivery Rate (CADR) of this unit is 190 m³/h, which means it can effectively purify the air in rooms up to 49m².
No, this model does not have a built-in display that shows specific numerical readings for PM2.5. It uses an intuitive color ring to indicate the general air quality level.
The air purifier has a power consumption of 20 W in maximum mode and significantly less in standby mode (0.5 W).
Ensure the power cord is securely plugged into both the device and a working electrical outlet. Check if the power switch is in the 'on' position.
Check that the PM2.5 sensor is clean and free of dust or obstructions. Ensure the air purifier is placed in an open area with good airflow, not too close to walls or furniture.
Verify that the filters are correctly installed and that no packaging material is still attached. Ensure the unit is on a stable, level surface. If the noise persists, contact customer support.
After replacing the filters, you may need to reset the filter indicator. Refer to the product manual for the specific reset procedure for your model.
Check the condition of the filters. If they are clogged with dust or debris, they may need to be replaced sooner than the recommended schedule. Ensure the air intake and outlet grilles are not blocked.
Setup:
Compatibility:
Care and Maintenance:
