Johnstone's Hardwearing Non Drip Gloss - White
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for DIY enthusiasts and professional painters seeking a durable, high-gloss finish that minimizes mess. Johnstone's Hardwearing Non Drip Gloss offers a smooth, even application for interior and exterior wood and metal surfaces, preventing drips and runs. A potential caveat is its solvent-based formulation, which requires good ventilation during use.
All features
| Colour | White |
|---|---|
| Brand | Johnstone's |
Extended Product Information
FAQs
What surfaces can I use Johnstone's Non Drip Gloss on?
It is suitable for interior and exterior wood and metal surfaces, including doors, skirting boards, radiators, and staircases.
How long does it take to dry?
It is touch dry in 4-6 hours and recoatable after 16-24 hours, depending on environmental conditions.
Do I need to use a primer?
For bare wood or metal, a suitable primer (like a rust-inhibiting primer for metal) is recommended for best adhesion and durability.
How do I clean my brushes after using this paint?
Clean brushes and equipment immediately after use with white spirit or a suitable solvent.
Is this paint suitable for outdoor use?
Yes, it is formulated for both interior and exterior wood and metal applications.
What is the coverage per litre?
The coverage is approximately 14 m² per litre.
What are the main benefits of the non-drip formula?
The non-drip formula helps prevent paint from dripping and running, making application easier, cleaner, and resulting in a smoother, more professional finish, especially on vertical surfaces.
Troubleshooting
Paint is too thick and difficult to apply.
Stir the paint thoroughly. If still too thick, thin slightly with white spirit according to the manufacturer's recommendations (usually no more than 5-10%).
Uneven finish or brush marks visible.
Apply thinner coats and avoid over-brushing. Ensure you are using a quality brush designed for solvent-based paints. Allow adequate drying time between coats.
Paint is not drying properly.
Ensure adequate ventilation and a consistent room temperature. Avoid applying in very humid conditions or too thickly. Check that the surface was properly prepared and free of contaminants.
Adhesion issues or peeling paint.
Ensure the surface was properly cleaned, degreased, and sanded if necessary. Use an appropriate primer for the surface type (e.g., metal primer, wood primer). Ensure the previous paint layer was fully dry and stable.
Pros and Cons
Pros
- Significantly reduces drips and runs for a cleaner finish.
- Provides a long-lasting, hardwearing, high-gloss surface.
- Suitable for a wide range of interior and exterior wood and metal projects.
- Easy to apply, even for less experienced painters.
- Minimizes mess and cleanup time.
Cons
- Requires good ventilation due to solvent-based formulation.
- Longer dry time compared to water-based paints.
- May have a strong odor during application and drying.
- Not suitable for all plastic surfaces without proper primer.
- Clean-up requires specific solvents.
Setup, Compatibility & Care
Preparation:
Ensure surfaces are clean, dry, and free from dust, grease, and flaking paint. Lightly sand glossy surfaces to improve adhesion. For bare wood, apply a suitable primer. For metal, use a rust-inhibiting primer if necessary.
Application:
Stir the paint thoroughly before use. Apply with a good quality brush or roller. For best results, apply in thin, even coats. Avoid over-brushing, as this can affect the non-drip properties.
Compatibility:
Suitable for interior and exterior wood and metal. Not recommended for use on flexible plastics or surfaces that may expand or contract significantly with temperature changes.
Drying Time:
Touch dry in 4-6 hours. Recoatable after 16-24 hours, depending on temperature and humidity.
Care and Cleaning:
Clean brushes and equipment immediately after use with white spirit or a suitable solvent. Lightly wipe painted surfaces with a damp cloth. Avoid abrasive cleaners, as they can damage the high-gloss finish.