Hudson Reed Juno 500mm Wall Hung Vanity Unit and Basin - Blue



Currently unavailable



Currently unavailable
The Hudson Reed Juno 500mm Wall Hung Vanity Unit and Basin in Blue is designed for homeowners and renovators seeking a compact, modern storage solution for smaller bathrooms, en-suites, or cloakrooms. It offers a stylish, space-saving wall-mounted design with soft-close cabinetry that keeps toiletries organized and out of sight; however, users should note that as a wall-hung unit, it requires a structurally sound wall capable of supporting the weight of the basin and cabinetry.
| Colour | Blue |
|---|---|
| Model Part Number | JNU2921B |
| Brand | Hudson Reed |
No, the tap and waste fittings are not included with the unit and must be purchased separately.
You can, provided there is adequate timber reinforcement behind the plasterboard to bear the weight of the unit and basin.
The basin has a single standard pre-drilled hole, meaning it is compatible with most standard monobloc basin mixers.
The unit is moisture-resistant and suitable for bathroom environments, but avoid direct water contact or sitting water on the surfaces.
The vanity unit is 500mm wide, making it perfect for compact spaces.
Yes, the Juno vanity unit is pre-assembled for easier installation.
Adjust the hinge tension screws to realign the doors and ensure the soft-close mechanism is fully engaged.
Check that the basin is properly sealed against the wall using a high-quality, water-resistant silicone sealant.
Verify that the wall-mounting brackets are fully tightened and that the wall anchors are securely embedded in the wall substrate.
To ensure a successful installation, verify that your wall structure is suitable for supporting a wall-hung unit; plasterboard walls may require additional timber reinforcement behind the surface. Ensure the water supply lines and drain waste are positioned correctly before mounting. During installation, use a spirit level to guarantee the unit is perfectly horizontal. For routine maintenance, wipe the exterior with a soft, damp cloth and avoid using abrasive sponges or harsh chemicals that could damage the matt finish. The ceramic basin can be cleaned with mild soapy water or a non-abrasive cream cleanser. Check the hinges periodically to ensure they remain aligned and tightened.