Terracotta Brick Weep Vents - Pack of 5
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
Terracotta Weep Vents Pack of 5 Suitable for commercial and domestic use. British Made. Satisfies NHBC Standards. Manufactured to BS EN ISO 9001. Dimensions 100mm x 64mm x 10mm. Available in a range of colours in our shop. The product can be slotted between two bricks and mortared into position. It provides an unobtrusive ventilation point for the cavity behind. The vent has a baffled grille to prevent the ingress of driving rain and wind whilst incorporating an insect grille and drip lip. This grille is sized to keep out large insects but is wide enough that it will not be blocked by debris, paint or water droplets. Use: Any situation where water must be discharged from an external wall, e.g: At ground floor slab level Within cavity tray systems Over external lintels Where a cavity must be ventilated On external walls - 100mm or more in thickness - built from brick, block or stone. Features & benefits: Purpose made and pre-formed to guarantee reliable discharge of water Less prone to inadvertent pointing-up than weep holes formed by simply leaving the perp. joint open Integral front grille prevents entry of large nest building insects into the cavity 4mm wide front aperture prevents entry of large nest building insects into the cavity Range of colours to blend with brick or mortar colour Quality: Satisfies all NHBC Standards 2006 Edition Manufactured to BS EN ISO 9001 : 2000 Complies with all relevant Building Regulations Meets all relevant British Standards. Also known as: Terracotta Brick Weep Vents. Pack of 5. Dimensions 100 x 64 x 10mm. Satisfies NHBC Standards British Made. Manufactured to BS EN ISO 9001.
All features
| Colour | Brown |
|---|---|
| Model Part Number | HS-1255-5 |
| Brand | B&Q |