Shopping.co.uk

D-C-Fix Grey Sand Slate Brick 3D Effect Wallpaper - Grey

Not AvailableD-C-Fix Grey Sand Slate Brick 3D Effect Wallpaper - Grey
Not Available
Not Available

Bring a modern feel to your home with this stunning slate brick wallpaper from D-C-Fix. This desig...

Currently unavailable

Colour
BrownGreyMulticolorRedWhite

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

This D-C-Fix Grey Sand Slate Brick 3D Effect Wallpaper is designed for homeowners seeking a quick, easy, and modern update to kitchens and bathrooms. Its key benefit is providing a realistic slate brick look with a 3D effect, easily applied over existing surfaces like tiles, offering a significant visual upgrade without the hassle of retiling. However, success relies on thorough surface preparation, ensuring it is smooth, solid, dry, and clean.

All features

ColourGrey
Model Part NumberF2701008
Brandd-c-fix

Extended Product Information

FAQs

Can this wallpaper be applied over textured tiles?

No, this wallpaper is designed for smooth, flat surfaces. It should not be applied over raised or textured tiles, as this will prevent proper adhesion and affect the 3D effect.

How do I clean the wallpaper?

The wallpaper can be cleaned at room temperature with a damp cloth. For best results and increased durability, especially in kitchen or bathroom environments, it is recommended to seal the surface with varnish.

What is the best way to apply this wallpaper in a shower cubicle?

Ensure the shower wall is smooth, clean, and dry. Apply the wallpaper horizontally, ensuring all edges and joins are sealed with waterproof silicone sealant. For maximum protection against water ingress, sealing the entire surface with a clear varnish is highly recommended.

How is this wallpaper removed?

To remove the wallpaper, carefully peel the PVC surface away from the support paper, starting from a corner. The remaining paper layer can serve as a base for new wallpaper or be removed completely.

What type of adhesive should I use?

For absorbent surfaces like plastered walls, use normal wallpaper paste applied to the reverse of the paper. For non-absorbent surfaces such as ceramic tiles, use a specific wallpaper glue and coat the wall before applying the paper.

Does the 3D effect look realistic?

Yes, the product features authentic printing and embossing to create a realistic 3D effect that mimics the appearance and feel of actual slate bricks.

Can I hang this wallpaper vertically?

This wallpaper is specifically designed for horizontal application to achieve a join-free finish, particularly on kitchen splashbacks. While technically possible, vertical application is not the intended use and may not yield the best aesthetic results.

Troubleshooting

Wallpaper not adhering well

Ensure the surface is clean, dry, and smooth. Reapply adhesive if necessary, using the correct type for the surface (paste for absorbent, specific glue for non-absorbent).

Bubbles or creases appear during application

Smooth out air pockets immediately with a soft cloth or squeegee, working from the center outwards. If persistent, carefully lift the section and reapply.

Seams are visible or lifting

Ensure strips are butt-joined precisely. Reapply adhesive to the edge of the lifting seam and press firmly. Seal edges with clear silicone sealant after drying.

Water damage or peeling in wet areas

Ensure the wallpaper surface has been properly sealed with varnish as recommended for high-moisture areas. Check that all edges and joins are securely sealed with silicone.

Pros and Cons

Pros

  • Provides a modern and realistic slate brick aesthetic.
  • Offers a quick and cost-effective alternative to retiling.
  • Waterproof and suitable for humid environments when sealed.
  • Easy to apply over existing smooth, flat surfaces.
  • Simple to cut and trim for custom fitting.
  • Removable for future redecoration.

Cons

  • Requires meticulous surface preparation for optimal adhesion.
  • Not suitable for uneven surfaces, untreated damp walls, or wood panelling.
  • Adhesive type depends on the surface (absorbent vs. non-absorbent).
  • Requires sealing for maximum durability and water resistance.
  • Horizontal application may not suit all design preferences.

Setup, Compatibility & Care Instructions

Surface Preparation:

Ensure the surface is smooth, solid, dry, and thoroughly clean before application. Remove any loose paint or wallpaper. If the surface is absorbent (e.g., plastered walls), apply normal wallpaper paste to the reverse of the paper and allow it to soak for 10 minutes. If the surface is non-absorbent (e.g., ceramic tiles), use a suitable adhesive and coat the wall before applying the paper.

Application:

Cut the wallpaper to the required size, allowing for slight overlap if necessary. Apply the paper, ensuring strips are butt-joined for a seamless finish. Carefully cut around obstacles like electrical sockets using scissors. If applying multiple strips, ensure they are precisely aligned edge-to-edge.

Sealing and Drying:

Seal all edges and joins using clear silicone sealant. Allow the applied wallpaper to dry completely for at least 24 hours before cleaning.

Compatibility:

Suitable for application on smooth, flat ceramic tiles, painted walls, hardboard, plywood, or shower walls. Avoid uneven surfaces such as raised tiles, wood panelling, and untreated damp walls.

Care:

Clean the surface at room temperature using a damp cloth. For enhanced durability and water resistance, sealing the surface with varnish is recommended.