Ronseal 15 Year Protection Direct to Metal Paint gives you a tough and durable finish to your metal. It takes minimal prep, doesn’t need a primer and can be applied directly to rust. It offers 15-year protection, has a quick recoat time, and is showerproof in 30 minutes. Low odour and no primer needed. Use on Metal, Wood, Cast Iron and Aluminium. For best results and 15-year protection, ensure metal is clean, dry, and free from dirt, dust, and grease. Apply on a dry day, above 10C, when rain is not expected. To prepare bare metal, remove loose rust or paint with a wire brush or 120 grit sandpaper. Wipe down with a damp cloth to remove all dirt. For previously painted metal, if in good condition and not flaking, lightly sand with 240 grit sandpaper. If flaking, remove paint with sandpaper or a wire brush, then wipe with a damp cloth and let dry. Stir paint well for 2 to 3 minutes before applying with a paintbrush, roller, or by spraying (dilute with about 10% water). Leave 2 to 4 hours between each coat. Two coats should provide coverage; 3 coats are recommended for rusty metal and ultimate durability. Touch dry in 30 minutes after the final coat. Clean brushes or rollers with warm soapy water. Do not empty leftover paint into drains or watercourses; contact your local authority for proper disposal. For maintenance, keep your metal looking its best.