XPG LANCER NEON RGB DDR5 Memory Kit - 32GB (2x16GB) 6400MHz CL32
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The XPG Lancer Neon RGB DDR5 Memory Kit is designed for gamers and PC enthusiasts seeking a performance boost with stunning aesthetics. It offers blazing-fast 6400MHz speeds and CL32 latency, enhancing multitasking and gaming experiences. A potential user must ensure their motherboard supports DDR5 memory and XMP/EXPO profiles for optimal performance.
All features
| Colour | Multicolor |
|---|---|
| Series | LANCER NEON |
| Model Part Number | AX5U6400C3216G-DCLANRSG |
| Brand | XPG |
Extended Product Information
FAQs
What is XMP?
XMP (Extreme Memory Profile) is a pre-defined profile that allows you to easily overclock your memory to its rated speeds with a single setting in your BIOS.
Do I need to install any software to use the memory?
While the memory will function without software, installing the XPG Prime software allows you to customize the RGB lighting effects.
How do I enable XMP in the BIOS?
Enter your BIOS settings (usually by pressing Del, F2, or F12 during startup), navigate to the memory settings, and enable the XMP profile. Select the profile that matches your memory's rated speed (6400MHz).
What if my motherboard doesn't support XMP?
You can manually configure the memory settings in your BIOS, but it may require more technical knowledge and time. Refer to your motherboard manual for the specific settings.
Can I use this memory with any CPU?
No, this memory is designed for systems that support DDR5 memory and the appropriate Intel or AMD processors. Check your motherboard and CPU specifications.
What is the warranty period for this memory kit?
The XPG Lancer Neon RGB DDR5 Memory Kit typically comes with a limited lifetime warranty.
How do I clean the memory modules?
Use a dry, soft cloth to gently wipe off any dust or debris. Do not use liquids or harsh chemicals.
Troubleshooting
System fails to boot after installing the memory.
Ensure the memory modules are properly seated in the slots. Check motherboard compatibility and try reseating the modules. If the issue persists, reset the BIOS settings or test with a single memory module.
XMP profile doesn't work.
Ensure your motherboard supports XMP 3.0. Check for BIOS updates and enable XMP in the BIOS settings. If problems persist, manually configure the memory settings or consult the motherboard manual.
RGB lighting is not working or not synchronizing.
Install the necessary RGB control software (e.g., XPG Prime). Ensure that the memory is properly connected to the motherboard and that the software recognizes the memory. Check for software updates and compatibility.
System is unstable or crashes during demanding tasks.
Check for compatibility issues, update BIOS, and adjust XMP profile or reduce memory speeds. Run memory tests to diagnose potential issues. Ensure adequate cooling and check for other hardware problems.
Pros and Cons
Pros
- High-speed performance for demanding applications and games.
- Stunning RGB lighting enhances the visual appeal of your PC.
- Easy overclocking with XMP 3.0 profiles.
- Improved power efficiency compared to DDR4.
- Enhanced stability and reliability through on-die ECC.
- Effective heat dissipation for sustained performance.
Cons
- Requires a DDR5 compatible motherboard.
- Overclocking potential may vary depending on the system and components.
- RGB lighting customization may require additional software.
- May be more expensive than lower-speed memory options.
- Potential compatibility issues with certain motherboard models.
Setup, Compatibility & Care
- Installation:
- Ensure your motherboard supports DDR5 memory. Refer to your motherboard's manual for DIMM slot locations.
- Open the clips on the memory slots.
- Align the notch on the memory module with the notch in the memory slot.
- Firmly press down on both ends of the memory module until the clips click into place.
- Compatibility:
- Verify compatibility with your motherboard's QVL (Qualified Vendor List) to ensure optimal performance and stability.
- Enable XMP or EXPO profiles in your BIOS to automatically configure the memory for its rated speeds.
- Care:
- Avoid touching the gold connectors on the memory modules.
- Protect the memory modules from static electricity during installation.
- Ensure proper airflow within your PC case to prevent overheating.
- Regularly check for dust buildup around the memory modules and clean if necessary.