Superfresco Milan Wallpaper - Silver
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone looking to understand and apply the Superfresco Milan Wallpaper in Silver. It offers a striking silver design with oxidised highlights, designed for seamless application. Keep in mind that the pattern has a 64cm repeat, which requires careful matching during installation.
All features
| Colour | Silver |
|---|---|
| Model Part Number | 100491 |
| Brand | Superfresco |
Extended Product Information
FAQs
What tools do I need to install this wallpaper?
You'll need a wallpapering table, measuring tape, a level, a smoothing brush or roller, a seam roller, a sharp utility knife, a pencil, a plumb bob, and a sponge.
How do I match the pattern?
The wallpaper has a straight match design. Align the pattern at the edges of each strip, matching the design elements. Ensure you match the pattern at the correct height, taking into account the 64cm repeat.
Can I use this wallpaper in a bathroom or kitchen?
While the wallpaper can be wiped clean, it's generally not recommended for areas with high moisture, such as bathrooms or kitchens, unless the area is well-ventilated and protected from direct water contact.
How do I remove the wallpaper?
The removal process depends on the type of adhesive used. Generally, you can score the wallpaper with a scoring tool or apply a wallpaper removal solution, letting it soak for a while, and then gently peel it off. Always follow the manufacturer's instructions.
What type of paint colors coordinate well with this wallpaper?
The wallpaper coordinates beautifully with Wilko Cosy Grey and Flintstone paints. You can also use other neutral colors like whites, light grays, or even a soft blue or green to complement the silver design.
How many rolls do I need?
The number of rolls you need will depend on the size of the room and the height of the walls. Measure the walls and calculate the total surface area, then divide by the coverage area of one roll (5.2 square meters). Consider waste for pattern matching.
Where can I buy this wallpaper?
This wallpaper is available from various retailers. Please check with your local stores or online vendors.
Troubleshooting
Wallpaper not adhering to the wall.
Ensure the wall is properly prepared (clean, dry, primed). Use the correct adhesive and ensure it's applied correctly. Check that the room temperature is within the recommended range.
Visible seams or gaps between wallpaper strips.
Carefully align the edges of the wallpaper strips, ensuring the pattern matches. Use a seam roller to smooth down the edges. If gaps persist, you might need to overlap the edges slightly.
Air bubbles under the wallpaper.
Use a smoothing brush or roller to remove air bubbles as you apply the wallpaper. If bubbles appear after application, carefully use a needle to prick the bubble and smooth it out.
Pattern not matching correctly.
Double-check the pattern repeat (64cm in this case) and match the pattern correctly before applying. If using multiple rolls, ensure they have matching batch codes.
Pros and Cons
Pros
- Elegant silver design adds a contemporary touch.
- Matching batch codes ensure a seamless pattern.
- Straight match design simplifies alignment.
- Large roll size provides good coverage.
- Coordinating colors make it easy to match with other decor.
Cons
- Requires careful alignment due to the 64cm repeat.
- Pattern matching may result in some material waste.
- Silver color might not suit all interior styles.
- Requires specific wallpapering tools and techniques.
- Can be more challenging to apply than non-patterned wallpaper.
Setup, Compatibility & Care
Setup:
- Preparation: Ensure walls are smooth, clean, dry, and free from imperfections. Fill any holes or cracks and sand down uneven surfaces.
- Priming: Prime the walls with a wallpaper primer. This will help with adhesion and make removal easier in the future.
- Adhesive: Use a good quality wallpaper adhesive suitable for the wallpaper type.
- Application: Apply the adhesive to the wall or the back of the wallpaper, following the manufacturer's instructions.
- Alignment: Carefully align the wallpaper, matching the pattern, and smooth out any air bubbles.
Compatibility:
This wallpaper is compatible with standard wallpaper adhesives and is designed for use on interior walls.
Care:
- Gently wipe clean with a damp cloth.
- Avoid using abrasive cleaners.
- Do not scrub the surface aggressively.
- Protect from direct sunlight to prevent fading.