Blackfriar Anti-Slip Floor Paint - Black
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone looking to protect and improve the appearance of their floors with a durable, slip-resistant coating. Blackfriar Anti-Slip Floor Paint provides an attractive finish while enhancing safety by reducing the risk of slips and falls. However, proper surface preparation is crucial for optimal adhesion and longevity.
All features
| Colour | Black |
|---|---|
| Brand | Blackfriar |
Extended Product Information
FAQs
How long does it take for the paint to dry?
Hard dry in 4 - 6 hours at 20°C. Recoat after 16 hours.
What surfaces can I use this paint on?
It is suitable for concrete, cement, wood, metal, and stone surfaces.
How much area will 1 liter of paint cover?
Coverage is 6-10m2/L per coat.
Can I use this paint outdoors?
Yes, it is suitable for both indoor and outdoor use.
What should I use to apply the paint?
You can use a brush or roller.
How should I prepare the surface before painting?
Ensure the surface is clean, dry, and free from loose particles, grease, or existing coatings. Lightly sand for better adhesion.
How many coats of paint should I apply?
For best results, apply two coats.
Is this paint resistant to chemicals?
Yes, it resists grease, oil, and weak solutions of acid and alkali.
Troubleshooting
Paint is not adhering properly.
Ensure the surface was properly prepared (cleaned and lightly sanded). Consider using a primer if necessary. Allow for a longer drying time.
Paint is not providing adequate slip resistance.
Ensure the paint was thoroughly stirred before application to distribute the anti-slip aggregates. Apply a second coat to improve the texture.
Paint is taking too long to dry.
Ensure adequate ventilation. Check the temperature and humidity levels in the application area, as this can affect drying times. Allow for 4 - 6 hours at 20°c.
The finish is not durable.
Ensure two coats were applied, and the paint has fully cured. Avoid heavy traffic or impact during the initial curing period.
Pros and Cons
Pros
- Provides excellent slip resistance, enhancing safety in potentially hazardous areas.
- Offers a durable and long-lasting finish, reducing the need for frequent reapplication.
- Suitable for a wide range of surfaces, including concrete, wood, and metal.
- Can be used both indoors and outdoors, offering versatile protection.
- Resists common chemicals like grease and oil.
- Easy to apply with a brush or roller.
Cons
- Requires thorough surface preparation for optimal adhesion.
- Solvent-based, which may have a strong odor during application and require adequate ventilation.
- Recoating requires a 16-hour wait time.
- Coverage is 6-10m2/L per coat.
- Not suitable for areas with heavy traffic.
Setup, Compatibility & Care
- Surface Preparation:
- Ensure the surface is clean, dry, and free from loose particles, grease, oil, or existing coatings.
- For concrete surfaces, consider etching or using a concrete cleaner.
- For other surfaces, lightly sand to create a key for the paint.
- Application:
- Stir the paint thoroughly before use.
- Apply using a brush or roller.
- Apply two coats for best results, allowing 16 hours between coats.
- Compatibility:
- Compatible with concrete, cement, wood, metal, and stone surfaces.
- Avoid application in temperatures below 10°C.
- Care:
- Clean spills immediately to prevent staining.
- Regularly sweep or mop the floor to remove dirt and debris.
- Avoid using harsh chemicals or abrasive cleaners.