Café Olé BFD Cafetière - 3 Cups/350Ml, Red, Grey
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for coffee enthusiasts seeking a stylish and efficient way to brew 3 cups of coffee at home. The Café Olé BFD cafetière offers prolonged heat retention and a smooth coffee finish, though its 350ml capacity is best suited for smaller servings. Key features include double-wall construction, premium stainless steel build, and a high-quality mesh filter.
All features
| Colour | Red |
|---|---|
| Accent Colour | Grey |
| Model Part Number | BFD-03RG |
| Brand | Café Olé |
Extended Product Information
FAQs
What is the capacity of this cafetière?
The Café Olé BFD cafetière has a capacity of 350ml, which is equivalent to approximately 3 standard cups of coffee.
What material is the cafetière made from?
It is crafted from premium 18/10 stainless steel with a granite effect finish.
How does the double-wall construction help?
The double-wall construction provides excellent insulation, helping to keep your coffee hotter for longer compared to single-wall designs.
Can I put this in the dishwasher?
It is recommended to hand wash the cafetière with warm, soapy water and a soft cloth to maintain its finish and ensure longevity. Avoid abrasive cleaners.
What type of coffee grind should I use?
For best results, use a coarse coffee grind. Fine grinds can seep through the filter and may clog the plunger mechanism.
How do I ensure a smooth coffee without grounds?
Use a coarse grind, steep for the recommended time, and press the plunger down slowly and steadily. Ensure the mesh filter is clean and properly assembled.
What are the dimensions of this cafetière?
Specific dimensions are not provided, but it is designed to brew 3 cups (350ml) and features a compact, minimalist design.
Troubleshooting
Coffee grounds in the cup
Ensure you are using coarse coffee grounds. Check that the mesh filter is properly seated and free of damage. Plunge slowly and steadily.
Plunger is difficult to press down
The coffee grounds may be too fine, or there might be a blockage. Remove the plunger, clean the filter thoroughly, and try again with coarser grounds.
Coffee is not hot enough
Preheat the carafe with hot water before brewing. Ensure the lid is placed on top during steeping. Serve coffee immediately after plunging.
Exterior finish is scratched or damaged
Avoid using abrasive cleaning materials or placing the cafetière where it can be easily knocked. Clean gently with a soft cloth.
Pros and Cons
Pros
- Excellent heat retention keeps coffee warm.
- Durable construction with high-grade stainless steel.
- Attractive minimalist design with granite effect.
- Produces a smooth coffee with minimal grounds.
- Compact size is suitable for smaller households.
Cons
- Limited capacity (3 cups) may not be sufficient for larger groups.
- The red and grey finish, while stylish, might not suit all kitchen decors.
- Requires careful handling to maintain the granite effect finish.
- Manual brewing process requires user attention.
Setup, Compatibility & Care
Setup:
- Pre-wash: Before first use, wash all parts of the cafetière with warm, soapy water. Rinse thoroughly.
- Add Coffee: Place coarsely ground coffee into the bottom of the carafe. A general ratio is 1:15 (coffee to water) but adjust to your preference.
- Add Water: Heat fresh water to just off the boil (around 90-96°C or 195-205°F). Pour hot water over the grounds, filling the carafe.
- Steep: Place the lid on top with the plunger pulled all the way up. Let the coffee steep for 4 minutes.
- Plunge: Slowly and steadily press the plunger down to separate the grounds from the liquid.
- Serve: Pour immediately to prevent over-extraction.
Compatibility:
- Coffee Grind: Best suited for coarse coffee grinds. Fine grinds can pass through the filter or clog it.
- Water Temperature: Use water just off the boil for optimal brewing.
Care:
- Cleaning: Hand wash the carafe and plunger assembly after each use with warm, soapy water. Avoid abrasive cleaners or scouring pads that could damage the finish.
- Drying: Dry all parts thoroughly with a soft cloth to prevent water spots.
- Plunger Maintenance: Periodically check the mesh filter for any blockages and ensure the plunger assembly is clean.