Everbuild Febond Blue Grit - 10L - Blue
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for plasterers and DIY enthusiasts who need a reliable bonding agent for plastering on challenging surfaces. Everbuild Febond Blue Grit provides a strong mechanical key, enabling plastering on low-suction and smooth backgrounds. However, ensure proper surface preparation for optimal adhesion.
All features
| Colour | Blue |
|---|---|
| Model Part Number | FBBLUE10 |
| Brand | Everbuild |
Extended Product Information
FAQs
What surfaces can I use Febond Blue Grit on?
Febond Blue Grit is suitable for use on plaster, concrete, painted surfaces, textured surfaces, and ceramic tiles.
How long should I let the Blue Grit dry before applying plaster?
Allow the Blue Grit to dry completely, typically 24 hours under normal conditions, but check the product instructions for specific drying times.
Do I need to prime the surface before applying Blue Grit?
No, Febond Blue Grit acts as the primer and bonding agent. Just ensure the surface is clean.
Can I use Febond Blue Grit on exterior surfaces?
Febond Blue Grit is primarily intended for interior use. Check the product specifications for exterior suitability.
How do I clean my tools after using Febond Blue Grit?
Clean tools with water immediately after use.
What is the coverage rate of Febond Blue Grit?
Coverage varies, but typically, 5-7 square meters per litre, depending on the surface and application method.
What is the shelf life of Febond Blue Grit?
Check the product packaging for the specific shelf life. Store in a cool, dry place and avoid freezing.
Troubleshooting
Plaster is not adhering properly.
Ensure the surface was properly prepared (clean, dry, and free of loose debris). Check that the Blue Grit was fully dry before plastering.
Uneven coverage of Blue Grit.
Apply a more even coat, ensuring the blue colour is visible across the entire surface. Use a brush or roller for even application.
Blue colour visible after plastering.
Ensure adequate plaster thickness to cover the blue tint completely. Apply a second coat of plaster if necessary.
Pros and Cons
Pros
- Enhances plaster adhesion on challenging surfaces.
- Easy to apply with a single-coat application.
- The blue tint helps ensure complete coverage.
- Suitable for a wide range of surfaces.
- Provides a reliable bond for long-lasting results.
Cons
- Requires proper surface preparation for optimal results.
- May not be suitable for all types of plaster or surfaces.
- Colour may be visible if not fully covered by plaster.
- Requires adequate drying time before plastering.
Setup, Compatibility & Care
- Surface Preparation: Ensure the surface is clean, dry, and free from loose particles, dust, and grease. Remove any loose paint or existing coatings.
- Application: Apply a single, even coat of Everbuild Febond Blue Grit using a brush or roller. Ensure complete coverage.
- Drying Time: Allow the Blue Grit to dry completely before applying plaster. Drying times can vary depending on environmental conditions; refer to the product instructions.
- Compatibility: Compatible with most cement-based plasters. Always check product compatibility before application.
- Care: Store in a cool, dry place. Avoid freezing.