Dulux Trade Metalshield Gloss is specially formulated for metal with a quick drying formula that can be overcoated within 4-8 hours. It provides lasting protection against corrosion on ferrous and non-ferrous metal substrates such as railings, garage doors, lift shafts, staircases and emergency exit routes. When applied with a primer like Dulux Trade Zinc Phosphate Primer or Dulux Trade Metalshield Quick Dry Metal Primer, it delivers up to 8 years of metal protection in a high shine finish. Suitable for use on interior or exterior ferrous or non-ferrous metals, this is a reliable, trade-quality metal paint that will suit most jobs. Applying Dulux Trade Metalshield Gloss For best results, ensure any rust, flaking or peeling paint has been removed before applying 1 coat of primer, either Dulux Trade Zinc Phosphate Primer or Dulux Trade Metalshield Quick Dry Metal Primer, followed by two full coats of Metalshield Gloss. Apply using a brush or roller for a smooth finish. Dulux Trade Metalshield Gloss - Gold - 1L. Dulux Trade Metalshield Gloss - Black. Dulux Trade Metalshield Gloss is specially formulated for metal with a quick drying formulation that can be overcoated within 4-8 hours. It provides lasting protection against corrosion on ferrous and non-ferrous metal substrates such as railings, garage doors, lift shafts, staircases and emergency exit routes. Applying our straightforward, single-pack system: an appropriate Metalshield primer from Dulux Trade + 2 coats of Metalshield Gloss from Dulux Trade will deliver up to 8 years metal protection.Application : Brush or roller only. For health and safety reasons related to all solvent based paints, spray application is not recommended. STIR THOROUGHLY BEFORE USE. Apply 1 coat of the appropriate Metalshield primer from Dulux Trade followed by 2 coats of Metalshield Gloss from Dulux Trade. Where a special process colour is to be used, or where a strong colour change is required, additional coats will be required (see appropriate Dulux Trade colour card). Not suitable for use in high traffic areas such as floors and stair treads.Finish GlossCoverage Up to 13m² per litreDrying Time 1-2 hoursRecoatable 4-6 hours. Specially formulated for metal, with a quick-drying solvent-based formulation that can be overcoated within 4-6 hours (depending upon conditions).