Audio Technica AT-LP60X - Black

Not Available Audio Technica AT-LP60X - Black

Not Available

Not Available

Whether you're just getting into records, rediscovering a record collection long since buried away...

Currently unavailable

Colour

Black Brown Grey Red White

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

The Audio Technica AT-LP60X is an ideal turntable for new vinyl enthusiasts, those rediscovering their record collection, or anyone looking to easily integrate analog audio into their current system. Its fully automatic operation and built-in switchable phono preamp provide a user-friendly experience and versatile connectivity options, making immediate playback simple. While perfect for beginners and casual listening, advanced users seeking extensive manual control or high-end customization might find its features more limited.

All features

Colour	Black
Model Part Number	AT-LP60XBK
Brand	Audio-Technica

Extended Product Information

FAQs

Is assembly required for the AT-LP60X?

Minimal assembly is required. You will need to place the platter, attach the drive belt, and connect the power and audio cables. The cartridge comes pre-installed and aligned.

Can I connect this turntable to Bluetooth speakers?

No, this specific model (AT-LP60X) does not have built-in Bluetooth connectivity. You would need a separate Bluetooth transmitter connected to the turntable's RCA outputs to stream to Bluetooth speakers, or consider a Bluetooth-enabled variant like the AT-LP60XBT.

How often should I replace the stylus?

The diamond stylus (ATN3600L) typically lasts for approximately 500+ hours of playback. You should consider replacing it when you notice a decrease in sound quality, increased surface noise, or if the stylus appears worn or damaged.

What types of records can the AT-LP60X play?

The turntable supports two speeds: 33-1/3 RPM for standard LPs and 45 RPM for singles and EPs. It comes with a 45 RPM adapter for convenience.

Do I need a separate amplifier or receiver to use this turntable?

Not necessarily. Thanks to its built-in switchable phono preamp, you can connect the AT-LP60X directly to any pair of powered speakers or an audio system with an auxiliary (LINE) input. If your speakers are passive, you will need an amplifier or receiver to power them.

How do I clean my records to get the best sound?

Before each play, gently brush your records with a carbon fiber record brush to remove surface dust and static. For deeper cleaning, use a dedicated record cleaning solution and microfiber cloth, following the product's instructions. Keep records stored vertically in their sleeves.

Troubleshooting

No sound output from speakers.

Verify the turntable's built-in preamp switch is set correctly: `LINE` for AUX inputs or powered speakers, `PHONO` for dedicated phono inputs. 2. Ensure RCA cables are securely connected to both the turntable and your audio system. 3. Check the volume level and input selection on your amplifier or powered speakers.

Record is playing at the wrong speed.

Check the speed selector switch on the turntable (33/45 RPM) and ensure it matches the speed of the record you are playing. Also, confirm the drive belt is properly seated around the motor pulley and the platter's inner rim.

Records are skipping or sound distorted.

Ensure the turntable is placed on a perfectly level and stable surface. Vibrations can cause skipping. 2. Inspect the stylus for dust, debris, or damage; gently clean it with a stylus brush. 3. Clean your records thoroughly to remove dust and static. 4. If the stylus is old (over 500 hours of play), it may need replacement.

Turntable platter is not spinning.

Confirm the AC adapter is securely plugged into both the turntable and a working electrical outlet. 2. Check if the drive belt has come loose or off the motor pulley; re-seat it if necessary. 3. Ensure the `Start` button has been pressed for automatic operation.

Pros and Cons

Pros

Easy-to-use fully automatic operation for hassle-free listening
Built-in switchable phono preamp offers versatile connectivity options
Plays both 33-1/3 and 45 RPM records, covering most vinyl formats
Affordable and accessible entry point into vinyl listening
Quality Audio-Technica Integral Dual Magnet™ cartridge with replaceable stylus
Reduced resonance features for improved sound clarity

Cons

Limited upgrade options beyond the stylus
Fully automatic design may not appeal to users preferring manual control
Not designed for advanced audiophile customization or fine-tuning
No direct USB output for digitizing records (specific to this model)

Setup, Compatibility & Care

Setup Instructions

Unpack: Carefully remove all components from the packaging, including the turntable body, platter, felt mat, dust cover, and accessories.
Install Platter and Belt: Place the die-cast aluminum platter onto the spindle. Locate the drive belt and carefully stretch it around the motor pulley (small brass or silver pin) and the underside rim of the platter.
Cartridge: The Integral Dual Magnet™ phono cartridge (ATN3600L) comes pre-installed on the tonearm, so no complex alignment is needed.
Connect Power: Plug the AC adapter into the turntable and then into a wall outlet.
Audio Connection: Connect the included RCA output cable from the turntable's output to your audio system.

To Powered Speakers/AUX Input: Ensure the preamp switch on the back of the turntable is set to `LINE`. Connect the RCA cable to your speakers' or receiver's auxiliary input.
To a Phono Input: If your receiver or amplifier has a dedicated `PHONO` input, set the preamp switch to `PHONO` and connect the RCA cable to the `PHONO` input.

Dust Cover: Mount the hinged dust cover onto the back of the turntable.

Compatibility

Audio Systems: Compatible with any audio system that has a `LINE` (Auxiliary) input or a dedicated `PHONO` input. This includes powered speakers, stereo receivers, integrated amplifiers, and soundbars.
Record Speeds: Plays both 33-1/3 RPM LPs and 45 RPM singles (using the included 45 RPM adapter).

Care & Maintenance

Dust Cover: Always use the removable hinged dust cover when the turntable is not in use to protect it from dust and debris.
Stylus Care: Regularly inspect the stylus (needle) for dust or buildup. Use a soft brush (often included with record cleaning kits) to gently brush the stylus from back to front. A dirty stylus can damage records and degrade sound quality.
Record Cleaning: Keep your records clean. Dust and grime on records can transfer to the stylus and cause surface noise or skipping. Use a carbon fiber brush before each play and a dedicated record cleaning solution for deeper cleans.
Surface: Place the turntable on a level, stable surface to prevent skipping and ensure optimal tracking.
Stylus Replacement: The diamond stylus (ATN3600L) has a lifespan of approximately 500+ hours. Replace it when you notice a degradation in sound quality or visible wear. Replacement styli are readily available.