AEG DKB5960HM Chimney Cooker Hood - Silver - A

The AEG DKB5960HM 90cm Chimney Extractor Hood in Stainless Steel offers powerful air extraction wi...

Currently unavailable

Colour

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

This guide is for anyone looking to understand and effectively use the AEG DKB5960HM Chimney Cooker Hood. This model offers powerful extraction and smart features to keep your kitchen air clean and fresh, with its Hob2Hood technology and efficient LED lighting. A key consideration is that optimal performance depends on proper installation and regular maintenance.

All features

ColourSilver
Energy EfficiencyA
Model Part Number942 150 531
BrandAEG

Extended Product Information

FAQs

How do I clean the grease filters?

The stainless steel grease filters are dishwasher safe. Alternatively, you can wash them by hand with warm, soapy water. Allow them to dry completely before re-installing.

How often should I clean or replace the charcoal filters (for recirculation)?

The charcoal filters need to be replaced approximately every 3-6 months, depending on your cooking habits. Refer to the manual for specific recommendations.

What is Hob2Hood technology?

Hob2Hood is a feature that allows the cooker hood to automatically control fan speed and lighting based on the heat setting on your compatible hob.

What is the warranty period for the AEG DKB5960HM?

The warranty period is typically two years from the date of purchase. Check your product documentation for specific details.

Can I use the hood in recirculation mode?

Yes, the hood can be used in recirculation mode. You will need to install charcoal filters for this function.

What are the different speed settings?

The hood has 3 standard speeds and an intensive speed for maximum extraction when needed.

How do I replace the LED light bulbs?

Refer to the user manual for instructions on how to replace the LED light bulbs. Make sure to use the correct type of replacement bulbs.

Where is the exhaust located?

The exhaust location is at the top of the hood.

Troubleshooting

The hood is not turning on.

Check the power connection and ensure the circuit breaker is not tripped. If the power connection is fine, consult a qualified electrician.

The hood is not extracting air effectively.

Check if the grease filters are clean. Also, ensure that the ductwork is not blocked if you're using ducted extraction.

The Hob2Hood function is not working.

Verify that your hob is compatible with Hob2Hood. Ensure that both the hob and the hood are properly connected and that the function is enabled on both devices. Check the manuals for both devices for specific instructions.

The lights are not working.

Check if the bulb needs replacement. Ensure the bulb type matches the specifications in the manual.

The hood is making excessive noise.

Make sure the fan blades are clear of any obstructions. If the noise persists, check the installation and consult the user manual for further troubleshooting steps or contact customer support.

Pros and Cons

Pros

  • Hob2Hood technology automates the extraction process, freeing up your attention for cooking.
  • The SilenceTech and 8000 Breeze functions ensure quiet and efficient air purification.
  • LED lighting provides bright and energy-efficient illumination of the cooktop.
  • The stainless steel filters are durable and easy to clean.
  • The powerful motor effectively removes smoke, odors, and vapor.
  • The design complements any kitchen style with its stainless steel finish.

Cons

  • Requires a compatible hob to utilize the Hob2Hood feature fully.
  • Installation may require professional assistance depending on the kitchen layout and venting.
  • The intensive speed setting increases the noise level.
  • The initial cost can be higher compared to basic range hoods.
  • Filter maintenance is required to maintain peak performance.

Setup, Compatibility & Care

Setup:

  1. Installation: This hood requires installation, which may involve wall mounting and connection to a power source. Consult the user manual or a professional installer for detailed instructions.
  2. Ducting/Recirculation: Decide whether to use ducted or recirculating extraction based on your kitchen design. Ducting requires an external vent, while recirculation uses filters to clean the air.
  3. Hob2Hood Compatibility: Ensure your hob is Hob2Hood compatible for automatic control.

Compatibility:

  • The hood is compatible with standard 220-240V AC power outlets.
  • Ensure sufficient space is available above your cooktop according to the manual.
  • The minimum distance from an electric hob is 50 cm, and from a gas hob is 65 cm.

Care:

  1. Cleaning Filters: The stainless steel grease filters are dishwasher safe. Clean them regularly (every 1-2 months) to maintain performance.
  2. Wiping Surfaces: Use a damp cloth to clean the stainless steel surfaces and control panel. Avoid abrasive cleaners.
  3. Replacing Filters: Replace charcoal filters (for recirculation mode) as needed. The filter cleaning indicator will alert you when to clean or replace them.