Rustins Quick Dry Textured Step and Tile Paint - Black
Not Available
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone looking to improve the safety and appearance of their tiles, concrete, or brick surfaces with the Rustins Quick Dry Textured Step and Tile Paint in Black. The paint provides a hard-wearing, durable, and weather-resistant finish with improved slip resistance, reducing the risk of slips in wet or dry conditions. Keep in mind that surface preparation is key for optimal results, as detailed later in this guide.
All features
| Colour | Black |
|---|---|
| Model Part Number | 366747 |
| Brand | Rustins |
Extended Product Information
FAQs
What surfaces can I use this paint on?
This paint is suitable for use on tiles, concrete, and brick surfaces.
Is this paint suitable for outdoor use?
Yes, this paint is weather-resistant and suitable for both interior and exterior applications.
How many coats of paint are needed?
It is recommended to apply two coats for optimal performance and durability.
How long does it take for the paint to dry?
The paint is quick-drying. Refer to the product label for specific drying times, typically around 4 hours between coats.
How much area does a 500ml can cover?
Coverage is approximately 14m² per litre per coat, depending on surface absorbency, so a 500ml can covers roughly 7m² per coat.
How do I clean the painted surface?
Clean spills immediately with water. Wash painted surfaces with a mild detergent and water as needed. Avoid abrasive cleaners.
What is the slip resistance rating?
It is independently tested and rated as low slip potential according to BS7976, Part 2, 2002.
Troubleshooting
Paint is not adhering properly.
Ensure the surface is thoroughly cleaned and degreased before application. Lightly sand glossy surfaces to improve adhesion. Apply a second coat.
The finish is not slip-resistant.
Ensure the paint is fully dry and cured according to the manufacturer's instructions. Apply the paint evenly and avoid applying too thinly.
The paint color is uneven.
Ensure the paint is thoroughly mixed before and during application. Apply an even coat and avoid over-brushing. Apply a second coat.
Pros and Cons
Pros
- Significantly improves the slip resistance of painted surfaces.
- Durable and long-lasting finish that can withstand heavy use.
- Suitable for a wide range of surfaces, including tiles, concrete, and brick.
- Quick drying time allows for faster project completion.
- Water-based formula makes it easy to apply and clean.
Cons
- Requires proper surface preparation for optimal adhesion and performance.
- Coverage may vary depending on surface absorbency.
- Color options are limited to black and red.
Setup, Compatibility & Care
- Surface Preparation:
- Clean the surface thoroughly to remove dirt, grease, and any previous coatings.
- Rinse with clean water and allow to dry completely.
- Lightly sand glossy surfaces to improve adhesion.
- Application:
- Stir the paint well before use.
- Apply two coats, allowing the recommended drying time between coats (typically 4 hours).
- Use a brush or roller suitable for water-based paints.
- Compatibility:
- Suitable for use on tiles, concrete, and brick.
- Not recommended for use on surfaces that are constantly submerged in water.
- Care:
- Clean spills immediately with water.
- Wash painted surfaces with a mild detergent and water as needed.
- Avoid abrasive cleaners or harsh chemicals.