Kanto TUK Powered Bookshelf Speakers - White
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Kanto TUK Powered Bookshelf Speakers are designed for home users seeking a high-quality, all-in-one audio solution that minimizes clutter. Their key benefit is delivering rich, room-filling sound with versatile connectivity options and built-in digital-to-analog conversion. A potential caveat is that while they offer a balanced sound profile, audiophiles seeking extreme bass or treble might consider pairing them with a subwoofer.
All features
| Colour | White |
|---|---|
| Series | TUK |
| Model Part Number | TUKMW |
| Brand | Kanto |
Extended Product Information
FAQs
Can I connect my turntable directly to the Kanto TUK speakers?
Yes, the Kanto TUK speakers feature a built-in phono preamplifier, allowing you to connect most turntables directly without the need for an external phono stage. Ensure you switch the input to 'PHONO' and connect the turntable's ground wire.
What is the purpose of the built-in USB DAC?
The built-in USB Digital-to-Analog Converter (DAC) allows you to connect your computer directly to the speakers via USB. This bypasses your computer's internal sound card, often providing a higher quality and more accurate digital audio signal.
How do I switch between audio sources?
You can switch between audio sources using the included remote control or by pressing the volume knob on the active speaker. The selected input will be indicated on the front display.
Can I connect a subwoofer to these speakers?
The Kanto TUK speakers have an active crossover that filters sub-80Hz frequencies when a subwoofer is connected. While there isn't a dedicated subwoofer output, you can typically connect a powered subwoofer to the line-out or RCA output of your audio source before it reaches the speakers, or if your subwoofer has line-level inputs.
What is the Bluetooth version and what codecs does it support?
The Kanto TUK speakers use Bluetooth version 4.2 and support advanced codecs such as aptX HD and AAC, which allow for high-fidelity wireless audio streaming.
Can I disable the automatic standby mode?
Yes, the automatic standby mode can be disabled if you prefer the speakers to remain powered on at all times. Refer to the product manual for specific instructions on how to disable this feature.
Does the USB port on the back charge devices?
Yes, the Kanto TUK speakers feature USB charging ports on the back that can be used to power or charge your connected devices, such as smartphones or tablets.
Troubleshooting
No sound from speakers
Ensure the speakers are powered on and connected to an AC outlet. Check that the volume is not muted or set too low. Verify that the correct input source is selected on the speakers or remote. Check all cable connections to ensure they are secure.
Bluetooth connection issues
Ensure the speakers are in Bluetooth pairing mode. Check that your device's Bluetooth is enabled and within range. Try turning Bluetooth off and on again on your device, or restart the speakers. If the issue persists, try unpairing and re-pairing the device.
Distorted or crackling sound
Lower the volume level. Ensure the audio source is not sending a distorted signal. Check that speaker wires are securely connected and not damaged. If using the phono input, ensure the turntable's ground wire is properly connected.
USB DAC not recognized by computer
Ensure you are using the correct USB cable (USB-A to USB-B). Try a different USB port on your computer. Restart your computer after connecting the speakers. Ensure the correct audio output device is selected in your computer's sound settings.
Remote control not working
Ensure there is a clear line of sight between the remote and the speakers' IR receiver. Check and replace the battery in the remote if necessary. Make sure the speakers are powered on and not in standby mode.
Pros and Cons
Pros
- All-in-one solution reduces the need for separate amplifiers and components.
- Excellent connectivity options support a wide range of audio sources.
- High-quality drivers and onboard DSP ensure a detailed and balanced soundstage.
- Convenient features like remote control and auto standby enhance user experience.
- Integrated phono preamp allows direct connection of turntables.
- USB DAC and headphone amp add significant value for digital audio enthusiasts.
Cons
- May require a subwoofer for users seeking extremely deep bass.
- Bluetooth 4.2 is not the latest version, though it supports aptX HD and AAC.
- Automatic standby mode can be a minor inconvenience if immediate playback is always desired.
- No dedicated app for EQ control, all adjustments are via remote or onboard controls.
Setup, Compatibility & Care
Setup:
- Connect the two speakers using the provided speaker wire.
- Connect your desired audio source(s) to the appropriate inputs (e.g., RCA, Optical, USB, 3.5mm).
- For turntables, ensure the selector is set to 'PHONO' and connect the ground wire.
- Connect the power cord to the active speaker and plug it into an AC outlet.
- Power on the speakers using the power button or the remote control.
Compatibility:
- Wired: Turntables (with built-in phono preamp), computers (via USB), TVs, CD players, game consoles, and other devices with RCA or Optical outputs.
- Wireless: Smartphones, tablets, and computers via Bluetooth 4.2 (supports aptX HD and AAC).
- Headphones: Standard 3.5mm headphone jack.
Care:
- Clean the speaker surfaces with a soft, dry cloth. Avoid abrasive cleaners or solvents.
- Ensure ventilation around the speakers is not obstructed.
- Keep the remote control clean and free of dust.