KODAK Step Wireless Mobile Photo Mini Printer - White
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
For anyone looking to instantly turn digital memories into physical keepsakes, the KODAK Step Wireless Mobile Photo Mini Printer offers a portable and ink-free solution for printing 2x3 adhesive photos directly from your smartphone or tablet. While it provides immediate gratification and creative versatility, optimal print quality relies on correct paper loading and proper lighting conditions of the original photo.
All features
| Colour | White |
|---|---|
| Series | Step |
| Brand | Kodak |
Extended Product Information
FAQs
What kind of paper does the KODAK Step printer use?
It uses KODAK Zink 2x3 inch adhesive photo paper, which uses Zink Zero-Ink technology and does not require ink cartridges.
How do I connect my phone to the printer?
You can connect your iOS or Android smartphone or tablet wirelessly via Bluetooth or NFC. Ensure Bluetooth is enabled on your device, or tap your NFC-enabled device to the printer.
Do I need ink for this printer?
No, the KODAK Step printer uses Zink Zero-Ink technology, so it does not require ink cartridges, toners, or ribbons. The color is embedded within the special photo paper.
How many photos can I print on a full charge?
The integrated lithium-ion battery allows for printing approximately 25 photos on a full charge.
Why is there a blue card with the photo paper?
The blue card is a Zink calibration sheet. It must be inserted from the same paper pack, barcode down, before printing to ensure optimal color accuracy and print quality.
Can I print photos larger than 2x3 inches?
No, the KODAK Step Wireless Mobile Photo Mini Printer is designed to print only 2x3 inch adhesive photos.
Are the prints waterproof or durable?
Yes, the Zink prints are designed to be durable and resistant to moisture, cracks, and dirt, making them suitable for sticking on various surfaces.
What should I do if a paper jam happens?
Do not pull the paper out manually. Turn the printer OFF and then ON again. This action will usually clear the paper jam automatically.
Troubleshooting
Printer won't turn on.
Ensure the printer is fully charged. Connect it to a power source and try again. If it still doesn't turn on, ensure the charging cable and adapter are functioning correctly.
Photos are not printing or print quality is poor.
Check if the photo paper is inserted correctly, with the blue calibration card from the same pack at the bottom, barcode facing down. Ensure the original photo has good lighting. If using a blue card from another pack, it might affect quality. Try re-inserting the paper.
Paper jam occurs.
Do NOT pull out the jammed paper manually. Turn the printer OFF and then ON again. This action is designed to automatically eject any jammed paper. If it persists, ensure the paper is loaded correctly and not overfilled.
Cannot connect via Bluetooth/NFC.
Ensure Bluetooth (or NFC) is enabled on your mobile device and the printer is powered on. Try restarting both your mobile device and the printer. Make sure the printer is not already connected to another device.
Prints appear dull or colors are off.
Verify that the blue calibration card from the current paper pack was used. The quality of the original photo and its lighting conditions can significantly impact the print's saturation and color accuracy. Try printing a different photo with good lighting.
Printer runs out of battery quickly.
Ensure the printer is fully charged before use (up to 25 prints per charge). Close any unnecessary apps on your connected device that might drain its battery. If the battery life has significantly degraded over time, contact support.
Photo doesn't eject properly.
Ensure nothing is obstructing the print slot during printing, including your hand. If a paper jam occurs, follow the 'paper jam' solution: turn the printer off and on again.
Pros and Cons
Pros
- Instant photo printing from mobile devices
- No ink cartridges needed due to Zink technology
- Prints are adhesive, durable, and resistant to moisture/smudges
- Highly portable and lightweight design
- Integrated rechargeable battery supports up to 25 prints per charge
- Easy to set up and use
Cons
- Print quality can be affected by original photo's lighting conditions
- Requires specific Zink 2x3 adhesive photo paper
- Paper jams can occur, requiring a restart
- Only prints 2x3 inch photos
- Limited battery life to 25 prints per charge
- Accidental covering of print slot can hinder printing
Setup, Compatibility & Care
Setup
- Charge the Printer: Before first use, fully charge the printer using the provided charging cable.
- Load Photo Paper: Open the paper tray. Ensure you insert the Zink photo paper pack correctly, with the blue quality card from the *same paper pack* at the bottom, barcode facing down. The blue card helps calibrate the printer for optimal color.
- Power On: Press and hold the power button to turn on the printer.
- Connect Wirelessly:
- Bluetooth: Enable Bluetooth on your iOS or Android smartphone/tablet. Search for the KODAK Step printer in your device's Bluetooth settings and pair. You may need to download the companion KODAK Step app for full functionality and editing.
- NFC: For NFC-enabled devices, simply tap your device to the NFC area on the printer to establish a quick connection.
- Print: Select a photo from your device's gallery or social media within the app, make any desired edits, and initiate printing.
Compatibility
The KODAK Step printer is compatible with most iOS and Android smartphones and tablets that support Bluetooth or NFC connectivity. Ensure your device's operating system is up-to-date for best performance.
Care
- Paper Handling: Always use genuine KODAK Zink 2x3 adhesive photo paper for best results and to prevent printer damage. Ensure the blue calibration card is used with each new pack.
- Cleaning: Wipe the exterior of the printer with a soft, slightly damp cloth if needed. Do not use harsh chemicals or abrasive cleaners.
- Storage: Store the printer in a cool, dry place away from direct sunlight and extreme temperatures.
- Printing Slot: When printing, avoid covering the print slot with your hand to ensure photos eject smoothly.
- Battery: To prolong battery life, avoid fully discharging the printer frequently. Charge it when the battery indicator is low.