Johnstone's Quick Dry Gloss - Red
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone looking to use Johnstone's Quick Dry Gloss in Red for their home improvement projects. The primary benefit is its quick-drying formula, allowing for faster project completion. However, keep in mind that optimal results depend on proper surface preparation. This guide will walk you through the key features, best practices, and troubleshooting tips to ensure a successful application of this high-quality, durable paint.
All features
| Colour | Red |
|---|---|
| Brand | Johnstone's |
Extended Product Information
FAQs
How long does it take for Johnstone's Quick Dry Gloss to dry?
It dries to the touch in 1-2 hours.
What surfaces can I use this paint on?
It is suitable for interior wood and metal surfaces, including skirting boards, doors, and radiators.
Do I need to use a primer?
Priming is recommended for bare wood and metal surfaces.
How many coats of paint should I apply?
Two thin coats are generally recommended for optimal results.
How much area does one tin of paint cover?
Coverage is approximately 13m² per tin.
How do I clean my brushes and rollers after use?
Clean brushes and rollers immediately after use with water.
Is this paint suitable for outdoor use?
While primarily for interior use, it can be used on exterior surfaces that are protected from direct weather exposure.
Troubleshooting
Paint is not drying properly.
Ensure the room is well-ventilated, and the temperature is within the recommended range. Check for excessive humidity. Ensure that the coat is thin and wait for the appropriate drying time before applying the second coat.
Paint finish is not smooth.
Sand the surface lightly before the next coat. Avoid over-brushing or over-rolling the paint.
Paint is peeling.
Ensure the surface is properly prepared. Remove any loose paint, sand the surface, and apply a primer before repainting.
Uneven coverage.
Apply two thin coats instead of one thick coat. Make sure you use enough paint on the brush or roller to cover the surface adequately.
Pros and Cons
Pros
- Fast drying time saves time and allows for quicker project completion.
- High opacity provides excellent coverage and reduces the number of coats needed.
- The gloss finish is durable and adds an attractive sheen to surfaces.
- Water-based formula is low odor and easy to clean up.
- Suitable for a wide range of interior wood and metal surfaces.
Cons
- Requires proper surface preparation for optimal results.
- May require multiple coats for darker colors or over existing dark paint.
- Gloss finish may highlight imperfections on surfaces.
- Coverage is 13m2 per tin, which may be less than expected for larger projects.
- The finish might not be suitable for all interior design styles.
Setup, Compatibility & Care
- Surface Preparation:
- Clean the surface thoroughly to remove dirt, grease, and old paint.
- Lightly sand the surface to create a key for the new paint.
- Prime bare wood or metal surfaces with a suitable primer.
- Application:
- Stir the paint well before use.
- Apply the paint with a brush or roller, ensuring even coverage.
- Apply two thin coats, allowing each coat to dry completely.
- Compatibility:
- Suitable for use on interior wood and metal surfaces.
- Ensure compatibility with any existing paint or primer.
- Care:
- Clean brushes and rollers immediately after use with water.
- Wipe spills immediately.
- Clean the painted surface with a damp cloth.
- Storage:
- Store in a cool, dry place.
- Keep the container tightly sealed when not in use.