TIPTOE Desk and Table Leg 75cm - Midnight Blue
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The TIPTOE 75cm legs in Midnight Blue are designed for DIY enthusiasts and homeowners looking to create custom dining tables or desks quickly and easily. The key benefit is tool-free installation and a unique clamping system that adds an industrial aesthetic. A potential caveat is the tray thickness limitation for the clamp mechanism. These durable steel legs offer a sustainable, European-made solution for personalized furniture projects.
All features
| Colour | Blue |
|---|---|
| Model Part Number | 55145354363265 |
| Brand | TIPTOE |
Extended Product Information
FAQs
How many legs do I need for a table?
For tables up to 180cm x 100cm, four legs are recommended. For tables longer than 180cm, add two additional legs for every meter of length.
What is the minimum and maximum thickness of a table top that these legs can attach to?
The legs are designed for table tops with a thickness ranging from a minimum of 30mm to a maximum of 41mm.
Can I use these legs for an outdoor table?
While made of durable steel, these legs are primarily designed for indoor furniture. Prolonged exposure to outdoor elements may affect the finish.
Do I need any tools to install the legs?
No, the TIPTOE legs feature a unique tool-free clamping screw system for easy and quick installation.
What is the weight limit for four TIPTOE legs?
Four legs can support a maximum combined weight of 70kg, including the table top itself.
Are these legs sold in sets?
No, the TIPTOE legs are sold individually, allowing you to purchase the exact number needed for your project.
How do I clean the Midnight Blue finish?
Wipe clean with a soft, damp cloth. Avoid abrasive cleaners to maintain the color and finish.
Troubleshooting
Leg feels wobbly after installation
Ensure the clamping screw is fully tightened. Check that the table top thickness is within the compatible range (30-41mm). Verify that the table surface is level.
Difficulty tightening the clamp screw
Make sure the leg is positioned correctly against the edge of the table top. Clean any debris from the clamp mechanism and the table edge.
Uneven table height
Confirm that all legs are installed at the same depth and tightened equally. Ensure the table top itself is flat and not warped.
Scratches on table top during installation
Always place the table top on a soft, protective surface (like a blanket or carpet) before attaching the legs. Be careful when positioning and tightening the legs.
Pros and Cons
Pros
- Extremely easy and fast tool-free installation.
- Enables personalized furniture creation with any chosen top.
- Durable and eco-friendly material (steel).
- Stylish industrial design with a unique clamping mechanism.
- High-quality European manufacturing.
Cons
- Requires a minimum tray thickness of 30mm for the clamp system.
- Maximum recommended tray size for four legs is 180 x 100 cm.
- Legs are sold individually, so multiple must be purchased for a table.
- Weight capacity for four legs including the top is limited to 70 kg.
Setup, Compatibility & Care Instructions
Setup:
- Place your chosen table top upside down on a soft, clean surface.
- Position the TIPTOE leg at the desired location on the underside of the table top.
- Tighten the integrated clamping screw by hand or with a standard screwdriver until the leg is securely fastened to the tray. Ensure the clamp is firmly gripping the tray edge.
- Repeat for all desired legs. Flip the table upright.
Compatibility:
- Tray Thickness: Compatible with table tops ranging from a minimum of 30mm to a maximum of 41mm thick.
- Table Size (for 4 legs): Maximum recommended dimensions are 180cm x 100cm.
- Larger Tables: For lengths exceeding 180cm, add two additional legs per meter (e.g., six legs total for a table up to 280cm long).
- Weight Capacity: A set of four legs can support a maximum of 70kg, including the weight of the table top.
Care:
- Clean the steel legs with a soft, damp cloth.
- Avoid using abrasive cleaners or harsh chemicals, as they may damage the finish.
- Periodically check the tightness of the clamping screws to ensure continued stability.