Sandtex 10 Year Exterior Multi Surface Gloss - Brilliant White - 750Ml
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for homeowners and DIY enthusiasts looking to protect and beautify their exterior surfaces. Sandtex 10 Year Exterior Multi-surface Gloss offers up to a decade of durable protection with a low-shine finish, ideal for various materials. Keep in mind that for optimal performance, a two-step application with the Sandtex 10 Year Exterior Primer Undercoat is recommended.
All features
| Colour | White |
|---|---|
| Model Part Number | 5010131585784 |
| Brand | Sandtex |
Extended Product Information
FAQs
How long does the paint last?
Sandtex 10 Year Exterior Multi-surface Gloss provides up to 10 years of durable protection when applied correctly.
Do I need a primer?
For optimal performance, using the Sandtex 10 Year Exterior Primer Undercoat is highly recommended.
How many coats of paint are needed?
Two coats of Sandtex 10 Year Exterior Multi-surface Gloss are recommended for best results.
What surfaces can I use this paint on?
It is suitable for wood, weathered PVC-u, brick, concrete, stone, aluminium, and non-ferrous metal.
How long does it take to dry?
It is touch dry in 1-2 hours.
Is it mould resistant?
Yes, it is designed to be mould resistant.
How do I clean the painted surface?
Use a mild detergent and a soft cloth or sponge.
Troubleshooting
Paint is flaking or cracking.
Ensure the surface was properly prepared before painting. Consider using a primer undercoat. If the issue persists, the surface may require further preparation or repair.
Paint is not drying properly.
Check the temperature and humidity. Ensure the surface is clean and free of contaminants. Make sure the paint is not past its expiration date. Ensure adequate ventilation.
Poor adhesion.
Ensure the surface is clean and dry. Lightly sand glossy surfaces. Apply a primer undercoat before painting.
Pros and Cons
Pros
- Durable 10-year protection
- Suitable for a wide range of exterior surfaces
- Quick drying time
- Resistant to cracking and flaking
- Mould resistant
Cons
- Requires a primer undercoat for optimal performance
- Available in limited colors compared to some competitors
Setup, Compatibility & Care
Setup
- Surface Preparation: Ensure the surface is clean, dry, and free from loose paint, dirt, and grease. Remove any existing flaking paint. Lightly sand glossy surfaces to improve adhesion.
- Priming (Recommended): Apply Sandtex 10 Year Exterior Primer Undercoat. Allow it to dry completely according to the manufacturer's instructions.
- Application: Stir the Sandtex 10 Year Exterior Multi-surface Gloss thoroughly before use. Apply two coats, allowing the recommended drying time between coats.
Compatibility
This paint is compatible with a wide range of exterior surfaces, including:
- Wood
- Weathered PVC-u
- Brick
- Concrete
- Stone
- Aluminium
- Non-ferrous metal
Care
Clean spills immediately with water. For general cleaning of the painted surface, use a mild detergent and a soft cloth or sponge. Avoid abrasive cleaners.