Urbn-Living Plastic Water Jerry Can With Spout & Tap - 20 Litre


Currently unavailable


Currently unavailable
This 20 Litre water jerry can from Urbn-Living is designed for anyone needing convenient and portable water storage, particularly for outdoor activities, camping, or gardening. Its key benefit is the integrated tap for easy dispensing and a leak-proof screw cap for secure transport. A potential consideration is its rigid plastic construction, which may not be suitable for all environments or long-term bulk storage needs without proper care.
| Colour | White |
|---|---|
| Brand | Urbn-Living |
| Container Volume | 20 Litre |
The jerry can is made from durable plastic, suitable for water storage.
Yes, it is suitable for storing drinking water when cleaned and maintained properly. Always use fresh, potable water and clean the container regularly.
Clean with mild soap and water, rinse thoroughly, and allow to air dry completely. For stubborn odors, a solution of water and white vinegar or baking soda can be used.
The dimensions are approximately 44 cm (length) x 16 cm (width) x 34 cm (height). The spout adds an additional 2.5 cm to the height.
The tap is integrated into the design. While it may be possible to unscrew it for cleaning or replacement in some cases, it is designed to be a permanent fixture. Check for specific instructions on removal if necessary.
Store the empty and dry jerry can in a cool, dry place, away from direct sunlight to preserve the plastic material.
When used as intended and cleaned regularly, the food-grade plastic is designed to be safe for water storage. Avoid prolonged storage of water or exposure to extreme heat.
Ensure the tap is fully closed. Check if there is any debris around the tap seal. If the seal appears worn, consider replacing the tap if possible or use thread seal tape on the tap threads.
Check if the water level in the can is too low. Ensure the air vent or screw cap is slightly loosened to allow air in as water flows out. The tap opening might be partially blocked; try cleaning it.
Clean the container thoroughly with a mild solution of water and vinegar or baking soda. Rinse extensively and allow it to air dry completely in sunlight if possible. Avoid storing non-potable water in it for extended periods.
Inspect the threads on both the container opening and the cap for any damage or debris. Clean the threads and try tightening again. If threads are damaged, the cap may need replacement.
Setup: The jerry can is ready for immediate use. Ensure the screw cap and tap are securely tightened before filling. Fill with clean water, avoiding overfilling. For garden use, simply fill with water and place it in the desired location.
Compatibility: This jerry can is designed for gravity-fed dispensing. It is compatible with most standard water types for drinking or general use. It is not designed to be connected to pressurized systems.
Care: Before first use and after each use, clean the inside of the container with mild soap and water. Rinse thoroughly. Allow to air dry completely before storing. Store in a cool, dry place, away from direct sunlight to prevent degradation of the plastic. Periodically check the tap and screw cap for any signs of wear or leakage.