Ronseal One Coat Cupboard Paint - Cobalt Grey - 750ml - Grey
If you want to update your kitchen without the cost of getting a new one, our One Coat Cupboard Pa...If you want to update your kitchen without the cost of getting a new one, our One Coat Cupboard Paint is just what you need. It covers cupboards, drawers, furniture and doors in just one coat. Great for kitchen cupboards and bedroom furniture. Transform cupboards with one coat. Won’t scuff or scratch – can stand up to everyday life. Brand new cupboards with one coat of paint. Won’t leave brush marks. Touch dry in only one hour. No need for a primer. Suitable for bare and previously painted wood and melamine surfaces. This paint can transform your kitchen cupboards, doors and wooden furniture in just one coat. It doesn't even need a primer. It's durable, so it’ll stand up to knocks, scuffs and spills. This product covers 8 m²/litre, needs 1 coat, can be applied with a brush, is dry to touch in 1 hour and if needed can be recoated in 1 hour. Make sure your room is above 10°C and open a window to keep it ventilated. Cover anything you don’t want to get paint over. If you’re painting cupboard doors or drawers, the easiest way to do this is to take them off the units and lay them flat. If your wood is in good condition, just give it a light sand with 240grit sandpaper. If the paint is flaking or cracked, you’ll need to sand it back to bare wood. Use 120grit sandpaper and sand in the direction of the woodgrain. Remember to wear a face mask. Vacuum any dust and wipe down with a damp cloth. Fill any holes or cracks with Ronseal Multi Purpose or High Performance Wood Filler. Be careful preparing any wood that was painted before 1960, as it may be coated with lead paint. Give the paint a stir, then paint it on with a synthetic brush or foam roller in the direction of the woodgrain. It’ll be touch dry in just 1 hour. Most of the time one coat is all you ever need. But, if you’re painting over a bold colour you may need a second coat. If this is the case, leave the first coat to dry for 4 hours. Then give it a light sand with 240grit sandpaper and wipe with a damp cloth. Once the surface is dry put the second coat on.
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.