JLab Go Party Speaker - Navy
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The JLab Go Party Speaker is for anyone looking to bring vibrant sound and dynamic lighting to their gatherings. Its key benefit is delivering powerful 10-watt audio with customizable RGB effects and the ability to sync with up to 100 other JLab Party speakers for an immersive experience. A potential caveat is that the full 16-hour battery life is reduced when RGB lights are active.
All features
| Colour | Blue |
|---|---|
| Series | Go Party |
| Model Part Number | SBGORNVY82 |
| Brand | JLab |
Extended Product Information
FAQs
How long does the battery last?
The JLab Go Party speaker offers up to 16 hours of playtime. However, this duration is reduced to approximately 8 hours when the RGB lighting effects are active.
Is the speaker waterproof?
The speaker has an IP56 rating, meaning it is protected against dust ingress and strong jets of water. It is water-resistant and can withstand splashes or light rain, but it is not designed to be submerged.
Can I connect more than two speakers?
Yes, using the LabSync feature, you can connect and synchronize up to 100 JLab Party speakers for a powerful, unified audio and lighting experience.
How do I create a stereo pair?
You can create a stereo pair by using the JLab app to designate one speaker as the left channel and another as the right channel. This enhances the soundstage for a more immersive listening experience.
What is the RMS rated power of the speaker?
The JLab Go Party speaker has an RMS rated power of 10 Watts.
Does it have a built-in microphone?
Yes, the JLab Go Party speaker includes a built-in microphone, allowing you to use it for speakerphone calls.
What Bluetooth version does it support?
The speaker supports Bluetooth version 5.3.
Troubleshooting
Speaker will not power on
Ensure the speaker is charged. Connect the USB Type-C cable and allow it to charge for at least 30 minutes before attempting to power on again. Check that the charging cable and port are clean.
Cannot connect via Bluetooth
Turn off Bluetooth on your device and the speaker, then turn them back on and try pairing again. Ensure the speaker is not connected to another device. For persistent issues, try resetting the speaker's Bluetooth connection (refer to app or manual for specific instructions).
No sound or distorted sound
Increase the volume on both the speaker and your connected device. Check the audio source for any issues. If using the JLab app, ensure no extreme EQ settings are applied. Try disconnecting and reconnecting Bluetooth.
LabSync not connecting multiple speakers
Ensure all speakers are powered on and within range. Verify that all speakers are in LabSync mode (check your connected device or speaker indicator lights). Try re-initiating the LabSync connection through the JLab app.
RGB lights not working
Check the JLab app to ensure lighting effects are enabled and configured correctly. Restart the speaker and your connected device. If the issue persists, contact JLab support.
Pros and Cons
Pros
- Powerful and clear audio output for its size.
- Versatile RGB lighting to enhance any event's ambiance.
- Extensive party-syncing capabilities with LabSync.
- Durable, water-resistant design for worry-free use outdoors.
- Long battery life supports extended use.
Cons
- Maximum battery life is reduced when RGB lights are active.
- App required for full customization of audio and lighting.
- Stereo pairing requires at least two speakers.
Setup, Compatibility & Care
Setup
- Power On: Press and hold the power button until the indicator light illuminates.
- Bluetooth Pairing: Enable Bluetooth on your device. Search for "JLab Go Party" and select it to connect.
- JLab App: Download the JLab app from your device's app store to unlock advanced audio and lighting controls.
Compatibility
- Bluetooth Devices: Compatible with any device featuring Bluetooth 5.3 or earlier (smartphones, tablets, laptops).
- LabSync: Requires other JLab Party speakers (sold separately) for syncing capabilities.
Care
- Cleaning: Wipe the exterior with a soft, dry or slightly damp cloth. Avoid harsh chemicals or abrasive materials.
- Water Resistance: The IP56 rating protects against dust ingress and water splashes. Do not submerge the speaker.
- Charging: Use the provided USB Type-C cable to charge the speaker. Ensure the charging port is dry before connecting.