Dyson Cyclone V10 Submarine - Silver/Copper
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Dyson V10 Submarine is designed for homeowners seeking a powerful cordless vacuum that can also tackle wet messes on hard floors. Its key benefit is the 2-in-1 functionality, offering the deep cleaning of a V10 vacuum combined with a dedicated wet roller head for spills. A potential caveat is its specific design for hard floors, making it less ideal for homes with extensive carpeting.
All features
| Colour | Silver |
|---|---|
| Accent Colour | Copper |
| Series | Cyclone V10 |
| Model Part Number | 594446-01 |
| Brand | Dyson |
Extended Product Information
FAQs
Can I use the Submarine™ head on my hardwood floors?
Yes, the Submarine™ wet roller head is designed for sealed hard floors, including wood, tile, stone, and laminate. Always ensure your wood floors are properly sealed.
How long does the battery last?
The vacuum provides up to 60 minutes of run time on a full charge in Eco mode. Runtime will vary depending on the power mode and tools used.
How often should I wash the filter?
Dyson recommends washing the filter at least once a month. Refer to your product manual for the most accurate guidance based on your usage.
What is the dustbin capacity?
The dustbin has a capacity of 0.76 liters.
Can I vacuum carpets with the Submarine™ head attached?
No, the Submarine™ wet roller head is only for hard floors. For carpets, you need to switch to the Motorbar™ cleaner head or another appropriate dry vacuum attachment.
How do I clean the Submarine™ wet roller brush?
After each use, rinse the roller brush under cold running water until clean. Allow it to air dry completely before reinstalling.
What comes in the box?
The box typically includes the Dyson Cyclone V10 Submarine vacuum, the Submarine™ wet roller head, Motorbar™ floor nozzle, mini motorized attachment, crevice nozzle, wall mount, and charger.
Troubleshooting
Vacuum has no suction
Check if the bin is full and empty it. Ensure the filter is clean and dry. Inspect the cleaner head and wand for any blockages and clear them. Confirm the machine is charged.
Submarine head is not dispensing water or cleaning effectively
Ensure the clean water tank is full and properly seated. Check that the dirty water tank is empty. Verify the roller brush is clean and not clogged. Make sure the machine is set to the correct power mode for wet cleaning.
Machine stops mid-clean
The battery may be depleted; recharge the machine. If the motor makes a noise and stops, check for blockages in the cleaner head, wand, or bin entry. Ensure the filter is not clogged and is dry.
Hair is tangled on the brush bar
Use the included tool or scissors to carefully cut away tangled hair. The de-tangling vanes in the Motorbar head are designed to minimize this, but occasional manual removal may be necessary.
Pros and Cons
Pros
- Combines vacuuming and wet cleaning for hard floors
- Strong suction power comparable to corded vacuums
- Long battery life offers extended cleaning time
- Effective at detangling hair from brush bars
- Captures fine particles with its advanced filtration system
Cons
- Primarily designed for hard floor wet cleaning; less effective on carpets
- Wet roller head requires specific maintenance
- Dust capacity is moderate at 0.76L, may need frequent emptying for larger homes
Setup, Compatibility & Care
Setup:
- Ensure the Dyson V10 Submarine is fully charged before first use. The charger and optional wall mount make storage and charging convenient.
- Select the appropriate cleaner head for your task: the Submarine™ wet roller head for hard floors, or the Motorbar™ cleaner head for general vacuuming.
- Attach the chosen cleaner head and desired wand or direct-use configuration.
Compatibility:
- The Submarine™ wet roller head is designed for sealed hard floors only (tile, stone, wood, ceramic, vinyl, linoleum, laminate).
- The included Motorbar™ cleaner head is suitable for both carpets and hard floors.
- The machine comes with a crevice tool and mini motorized attachment for upholstery and tight spaces.
Care:
- Submarine™ Wet Roller Head: After each use, rinse the roller brush thoroughly under cold running water until clean. Empty and rinse the clean water and dirty water tanks. Allow the roller and tanks to dry completely before reassembling.
- Filter: The filter should be washed regularly with cold water (no detergent) and air-dried completely for at least 24 hours before reinstallation. Check the manual for specific washing frequency recommendations.
- Bin: Empty the bin when dirt reaches the MAX line. Wipe the exterior with a damp cloth.
- Brush Bar (Motorbar Head): Periodically check for tangled hair or debris and remove as needed.