Everbuild Constructa Pro Adhesive Foam Gun Grade 750ml - Grey
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for builders, contractors, and DIY enthusiasts looking for a strong, versatile adhesive. Everbuild Constructa-Pro offers a high-strength bond to various materials, saving time and effort. However, note that it requires a foam gun applicator for use. This guide covers key features, usage, and troubleshooting to help you get the most out of Constructa-Pro.
All features
| Colour | Grey |
|---|---|
| Model Part Number | Evbconpro07 |
| Brand | Everbuild |
Extended Product Information
FAQs
What materials can I use Constructa-Pro on?
Constructa-Pro is suitable for stone, concrete blocks, brick, wood, plasterboard, insulation board, and metal.
Do I need a special tool to use Constructa-Pro?
Yes, you need a foam gun applicator for precise application.
Is Constructa-Pro waterproof?
It is moisture-resistant.
Can I use Constructa-Pro outdoors?
Yes, it is temperature resistant from -40C to 80C.
How long does it take for Constructa-Pro to cure?
Curing time varies depending on environmental conditions; always refer to the manufacturer's instructions.
How should I store Constructa-Pro?
Store in a cool, dry place away from direct sunlight.
What do I do if I get Constructa-Pro on my skin?
Avoid contact with skin. In case of contact, remove with a proprietary solvent or wash off with soap and water.
Troubleshooting
Foam is not dispensing.
Check if the can is properly attached to the foam gun. Ensure the nozzle is not blocked. Shake the can vigorously.
Foam is expanding excessively.
Apply less foam initially. If excessive expansion occurs, trim the excess foam after curing.
Poor adhesion.
Ensure surfaces are clean and dry before application. Use the correct amount of foam.
Pros and Cons
Pros
- Strong adhesive bond for various materials.
- Suitable for a wide range of applications.
- Resistant to moisture and extreme temperatures.
- Easy to apply with a foam gun.
Cons
- Requires a foam gun applicator for use.
- Can be messy if not applied carefully.
- Curing time may vary depending on environmental conditions.
Setup, Compatibility & Care
- Preparation: Ensure surfaces are clean, dry, and free from loose particles. Use appropriate PPE.
- Foam Gun: Attach the Constructa-Pro can to a foam gun applicator.
- Application: Apply the foam evenly to one surface. Avoid excessive amounts.
- Assembly: Bring the surfaces together and hold them for the recommended time.
- Curing: Allow the foam to fully cure according to the manufacturer's instructions. Curing time can vary based on temperature and humidity.
*Compatibility*: Compatible with most common building materials, including stone, concrete blocks, brick, wood, plasterboard, insulation board, and metal.
*Care*: Store in a cool, dry place away from direct sunlight. Once opened, use the product within a reasonable time as per the manufacturer's recommendations.