Dulux Trade Weathershield Exterior High Gloss - Black
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone looking to protect and beautify exterior wood and primed metal surfaces. Dulux Trade Weathershield Exterior High Gloss offers up to 8 years of weather protection and a high-gloss finish. Note that for optimal results and longevity, it's essential to use the full 3-part system including Weathershield Preservative Primer and Weathershield Flexible Undercoat.
All features
| Colour | Black |
|---|---|
| Model Part Number | 5180253 |
| Brand | Dulux Trade |
Extended Product Information
FAQs
How much area does 1L of Dulux Trade Weathershield Exterior High Gloss cover?
1L covers up to 18 m² on average.
Can I use this paint on interior surfaces?
No, this paint is specifically designed for exterior use.
How many coats of paint are needed?
Apply two coats of the High Gloss.
What is the recommended drying time?
Minimum drying time is 4 hours, maximum drying time is 6 hours.
What should I use to clean my brushes?
Use brush cleaner to clean the brushes after use.
Is spray application recommended?
No, spray application is not recommended for this product.
What is the shelf life of the paint?
Protect from frost and store in a moderate temperature.
Troubleshooting
Paint is not drying properly.
Ensure adequate ventilation and check the temperature and humidity levels. Allow sufficient drying time between coats (minimum 4 hours, maximum 6).
Mould growth appears on the paint film.
Ensure the surface was properly cleaned and primed. Although the paint contains a fungicide, severe conditions might still cause mould. Clean the affected area with a fungicidal wash.
Uneven finish after application.
Ensure the paint is stirred thoroughly before use. Apply the paint evenly with a brush, avoiding excessive thickness in one area.
Paint is peeling.
Ensure the surface is properly prepared, including cleaning and priming. Make sure all old paint is removed and the surface is dry.
Pros and Cons
Pros
- Long-lasting weather protection (up to 8 years).
- Provides a high-gloss finish, enhancing the appearance of surfaces.
- Contains a fungicide to prevent mould growth.
- Easy to apply with a brush.
- Suitable for a wide range of exterior surfaces (wood and primed metal).
Cons
- Requires a 3-part system for the full 8 years of protection, increasing the overall application time and cost.
- Solvent-based, which may require proper ventilation during application.
- Application is brush only, not suitable for spray application.
- Recoating requires 16-24 hours between coats.
Setup, Compatibility & Care
Setup
- Surface Preparation: Ensure surfaces are clean, dry, and free from any loose paint or debris. For best results, use a Fungicidal Wash.
- Priming: Apply Weathershield Preservative Primer to bare wood or previously painted surfaces.
- Undercoat: Apply two coats of Weathershield Flexible Undercoat.
- Application: Stir the High Gloss thoroughly before use. Apply two coats with a brush.
Compatibility
- Compatible with Weathershield Preservative Primer and Weathershield Flexible Undercoat for the full 8-year protection.
- Suitable for use on exterior woodwork and primed metal.
Care
- Clean brushes with brush cleaner after use.
- Store in a cool, dry place, away from extreme temperatures and frost.
- Avoid storing or using in extreme temperatures.