Blackfriar Anti-Slip Floor Paint - White
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone looking to apply Blackfriar Anti-Slip Floor Paint - White to concrete, cement, wood, metal, or stone surfaces. The paint provides a tough, durable, and slip-resistant finish, ideal for both indoor and outdoor use. Keep in mind that proper surface preparation is crucial for optimal results.
All features
| Colour | White |
|---|---|
| Model Part Number | BF2040012D1 |
| Brand | Blackfriar |
Extended Product Information
FAQs
What surfaces can I use this paint on?
This paint is suitable for concrete, cement, wood, metal, and stone surfaces.
Is this paint suitable for outdoor use?
Yes, this paint is suitable for both indoor and outdoor use.
How long does it take for the paint to dry?
It takes 4-6 hours to hard dry at 20°C. Recoating can be done after 16 hours.
How much area does one liter of paint cover?
Coverage is approximately 6-10m² per liter per coat.
Can I apply this paint with a brush?
Yes, it can be applied using a brush or roller.
What should I do if the paint gets on my skin?
Wash the affected area with soap and water.
Is this paint resistant to chemicals?
Yes, it resists grease, oil, and weak solutions of acid and alkali.
Troubleshooting
Paint is not adhering to the surface.
Ensure the surface is properly prepared, clean, dry, and free of contaminants. Lightly sand smooth surfaces for better adhesion.
Paint is not providing adequate coverage.
Apply a second coat of paint, ensuring even coverage. Make sure the paint is stirred well before application.
The surface is still slippery after application.
Ensure the paint was applied evenly and that the recommended coverage rate was followed. Inadequate application can reduce the effectiveness of the anti-slip properties.
Pros and Cons
Pros
- Provides a slip-resistant surface, enhancing safety.
- Offers excellent coverage and durability for long-lasting protection.
- Suitable for a wide range of surfaces, increasing versatility.
- Resists common chemicals, making it suitable for various environments.
Cons
- Requires proper surface preparation for optimal adhesion.
- Recoating requires a 16-hour waiting period.
- Coverage can vary based on the surface and application method.
Setup, Compatibility & Care
Setup:
- Surface Preparation: Thoroughly clean and prepare the surface. Remove any loose paint, dirt, grease, or oil. Lightly sand smooth surfaces to improve adhesion.
- Application: Stir the paint thoroughly before use. Apply using a brush or roller, ensuring even coverage.
- Coats: Apply one or two coats as needed, allowing the recommended drying time between coats.
Compatibility:
- Compatible with concrete, cement, wood, metal, and stone surfaces.
- Suitable for indoor and outdoor use.
Care:
- Clean spills promptly to prevent staining.
- Wash the surface with mild detergent and water when needed.
- Avoid using abrasive cleaners or tools that may damage the paint.