Miele DAH4970 Sienna 90cm Wall Extractor Hood - Grey - A++
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Miele DAH4970 Sienna Wall Extractor Hood is designed for home cooks who want a powerful and stylish way to keep their kitchen air clean. This extractor hood offers automatic fan control with Con@ctivity, ensuring optimal air quality, and features an energy-efficient ECO motor. Keep in mind that while it offers powerful extraction, proper installation and ducting (or recirculation setup) are essential for optimal performance.
All features
| Colour | Grey |
|---|---|
| Energy Efficiency | A++ |
| Model Part Number | 12545670 |
| Brand | Miele |
Extended Product Information
FAQs
How do I clean the grease filters?
The stainless steel grease filters are dishwasher-safe. You can also clean them by hand using warm, soapy water.
How often should I replace the charcoal filter?
The charcoal filter should be replaced every 120-240 hours of use. The hood will indicate when it's time to replace the filter.
What is Con@ctivity?
Con@ctivity is Miele's technology that allows the hood to communicate with the hob and automatically adjust fan speed based on cooking activity.
Can I use the hood in recirculation mode?
Yes, the hood can be used in recirculation mode. You will need to purchase and install charcoal filters separately.
What is the run-on function?
The run-on function ensures that the hood continues to extract air for a set amount of time (5 or 15 minutes) after cooking is finished, removing lingering odors.
What type of lighting does the hood use?
The hood uses energy-efficient LED lighting.
What is the warranty period?
Please refer to the Miele warranty information for specific coverage details.
How do I adjust the fan speed?
You can adjust the fan speed using the touch controls on the hood. You have a choice of 3 speeds, plus the intensive speed setting.
Troubleshooting
Extractor hood not turning on.
Check the power supply and ensure the power cord is properly connected. Verify the circuit breaker hasn't tripped.
Poor extraction performance.
Check if the grease filters are clean. If using recirculation, check/replace the charcoal filter. Ensure the ducting is clear of obstructions.
Hood making excessive noise.
Ensure the hood is securely mounted. Check for any loose parts. Check the fan is not obstructed.
Con@ctivity not working.
Ensure the hob and hood are properly paired and connected to the same Wi-Fi network. Check the hob settings and the hood settings.
Lights not working.
Check the bulb and replace if necessary. Consult the manual for specific bulb type. Check connections and ensure the lights are switched on.
Pros and Cons
Pros
- Automatic operation with Con@ctivity enhances convenience and efficiency.
- The ECO motor provides powerful performance with significant energy savings.
- Dishwasher-safe grease filters simplify cleaning and maintenance.
- The touch controls offer a sleek and intuitive user experience.
- The design integrates well with modern kitchen aesthetics.
- Effective grease filtering ensures a clean kitchen environment.
Cons
- Requires proper installation and either ducting or a recirculation setup.
- Recirculation kits and charcoal filters are sold separately.
- The initial cost may be higher compared to some other extractor hood models.
- Fingerprints can be visible on the touch controls.
- The concrete-look surface may require specific cleaning methods.
- Limited to 3 speed settings, plus the intensive speed setting.
Setup, Compatibility & Care
Setup:
- Carefully unpack the extractor hood and all components.
- Mount the hood securely to the wall, ensuring it is level and properly aligned with your cooktop.
- Connect the power supply.
- Decide on a ducting or recirculation setup. If ducting, connect the exhaust pipe to an external vent.
- If using recirculation, install the charcoal filters (sold separately).
- Follow the instructions in the manual for initial setup and configuration.
Compatibility:
- The DAH4970 is designed for use with standard 230V, 50 Hz electrical systems.
- Ensure the mounting surface can support the hood's weight (18 kg).
- For Con@ctivity, ensure compatibility with your Miele hob and home Wi-Fi network.
Care:
- Clean the stainless steel filters regularly in the dishwasher or by hand.
- Wipe the exterior surfaces with a soft, damp cloth. Avoid abrasive cleaners.
- Clean the control panel with a soft, dry cloth.
- Replace the charcoal filters every 120-240 hours of use, or as indicated by the filter saturation indicator.