Varta Lithium CR123A 3V - Pack of 10

Cylindrical lithium battery suitable for high-tech cameras and flash units. This Varta CR123A batt...

Currently unavailable

Colour

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

This guide is for users of high-tech cameras and flash units requiring reliable, high-performance power. The Varta 06205 CR123A lithium battery offers a powerful 3V output and a 1430 mAh capacity, ensuring maximum safety and reliability for modern energy needs. While offering excellent longevity, users should note that these are single-use batteries and not rechargeable.

All features

ColourBlue
Model Part Number6205301461
BrandVarta

Extended Product Information

FAQs

Are these Varta CR123A batteries rechargeable?

No, the Varta 06205 CR123A batteries are primary (single-use) lithium batteries and are not designed to be recharged.

What is the shelf life of these batteries?

Lithium batteries like the CR123A generally have a very long shelf life, often 10 years or more when stored properly in a cool, dry place.

How do I dispose of used Varta CR123A batteries?

Lithium batteries should be disposed of responsibly. Check with your local recycling facilities for specific guidelines on battery disposal in your area, as they often require special handling.

What devices are these batteries typically used in?

These batteries are commonly used in high-drain electronic devices such as digital cameras, flash units, high-power flashlights, security sensors, and some medical equipment.

Can I use these batteries interchangeably with other battery sizes?

No, you should only use the CR123A size battery as specified by your device manufacturer. Using an incorrect size can damage the device or pose a safety risk.

What does '1430 mAh' mean?

mAh stands for milliampere-hour, which is a measure of battery capacity. A higher mAh rating indicates that the battery can supply a given current for a longer period, meaning it has more energy storage.

Troubleshooting

Device not powering on

Ensure batteries are inserted with correct polarity (+/-). Check if batteries are depleted and replace if necessary. Verify that the device's battery compartment contacts are clean.

Device operating intermittently

This could indicate low battery power. Replace all batteries in the pack with fresh ones. Ensure all batteries are from the same pack and are the correct type (CR123A).

Battery leaking

If a battery appears to be leaking, carefully remove it from the device using protective gloves. Clean the battery compartment thoroughly with a dry cloth. Do not use leaking batteries.

Pros and Cons

Pros

  • Excellent high-drain performance for demanding devices
  • Long shelf life due to lithium technology
  • Consistent and stable 3V output
  • High safety and reliability from a trusted brand
  • Convenient multi-pack for continuous use

Cons

  • Not rechargeable, requires replacement after use
  • May be more expensive upfront than standard alkaline batteries
  • Specific size requirement (CR123A) limits compatibility

Setup, Compatibility & Care

Compatibility: This battery is specifically the CR123A size. Always check your device's manual or battery compartment for confirmation that CR123A is the correct replacement. It is also commonly known as a CR17345.

Installation:

  1. Ensure the device is powered off.
  2. Open the battery compartment, noting the polarity markings (+ and -).
  3. Insert the CR123A batteries, matching the (+) end of the battery with the (+) marking in the compartment, and the (-) end with the (-) marking.
  4. Close the battery compartment securely.

Care:

  • Store batteries in a cool, dry place, away from direct sunlight and extreme temperatures.
  • Keep batteries in their original packaging until ready for use to prevent accidental short-circuiting.
  • Do not attempt to recharge or disassemble these batteries, as they are designed for single use only.
  • Ensure contacts on the battery and in the device are clean before insertion. A dry cloth or eraser can be used for cleaning contacts.