Pyle Ceiling Speakers, 2-Way Midbass Woofer, 6.5 Inch, White
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Pyle PDIC61RD is a pair of 6.5-inch, two-way in-ceiling speakers designed for discreet, high-quality audio installations in homes and offices. They offer a space-saving solution for achieving rich stereo sound without occupying floor space. While they provide excellent acoustic performance for their size and type, users should be aware that optimal bass response may require careful placement and integration with a subwoofer for critical listening.
All features
| Colour | White |
|---|---|
| Model Part Number | PDIC61RD |
| Brand | Pyle |
Extended Product Information
FAQs
What is the maximum power handling for these speakers?
Each speaker has a maximum output power of 200 watts (PMPO) and a rated power of 100 watts (RMS).
What size is the cutout needed for installation?
The cut-out diameter is approximately 20 cm (7 7/8 inches), and the required installation depth is 6.5 cm (2 3/4 inches).
Can these speakers be painted to match my decor?
The product description does not explicitly state if they can be painted, but typically, speaker grilles can be carefully painted to match room aesthetics. It's recommended to test on an inconspicuous area first.
What is the frequency response range?
The frequency response range is 70 Hz to 20 kHz.
Are these speakers sold individually or as a pair?
These speakers are sold as a pair, meaning you receive two speakers in the package.
What is the impedance of the speakers?
The impedance is 4-8 ohm.
What type of tweeter is used?
A directable 0.5-inch polymer dome tweeter is used.
Troubleshooting
No sound from speakers
Verify that speaker wires are securely connected to both the speaker terminals and the amplifier output. Ensure the amplifier is powered on and set to the correct input source. Check amplifier volume levels.
Distorted or muffled sound
Check for loose wire connections. Ensure the speaker is properly seated in its mounting location. Reduce the volume output from the amplifier. Verify that the speaker is not physically obstructed.
Crackling or popping noises
Inspect speaker wire for damage or fraying. Ensure all connections are clean and tight. Try a different set of speaker wires to rule out wire defects. Clean dust from the speaker drivers if accessible.
Pros and Cons
Pros
- Discreet, space-saving in-ceiling design
- Clear, full-range stereo sound reproduction
- Easy to install with included template and hardware
- Durable construction for long-term use
- Directable tweeter for customizable sound projection
Cons
- May require a subwoofer for deep bass in demanding audio applications
- Weight of 11.2 kg per speaker might require sturdy mounting surfaces
- White color may not blend with all decor without painting
Setup, Compatibility & Care
Setup:
- Determine the desired mounting location in your wall or ceiling.
- Use the included cut-out template to trace the speaker's outline.
- Carefully cut the opening using a jigsaw or appropriate cutting tool.
- Connect speaker wires from your amplifier to the speaker terminals.
- Insert the speaker into the cut-out opening.
- Tighten the mounting screws to engage the spring-latch mechanism, securing the speaker flush against the surface.
Compatibility:
- Requires a stereo amplifier or receiver with 4-8 ohm speaker impedance compatibility.
- Wired connection technology.
- Suitable for use in homes, offices, and commercial environments.
Care:
- Wipe the speaker grilles and frames with a dry or slightly damp cloth as needed. Avoid abrasive cleaners.
- Ensure the environment is free from excessive moisture or dust.