Shopping.co.uk

Rustins Quick Dry Metal Paint - White 500ml

Not AvailableRustins Quick Dry Metal Paint - White 500ml
Not Available
Not Available
Not Available
Not Available
Not Available

A quick drying water based direct to metal paint. No primer required. Suitable for bare metal, cas...

Currently unavailable

Colour
BlackGoldGreenSilverWhite

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

This guide provides comprehensive information on Rustins Quick Dry Metal Paint, a water-based paint designed for both interior and exterior metal surfaces. Ideal for DIY enthusiasts and professionals, it offers a quick-drying, low-odour solution with anti-corrosion properties. Note that this paint is not suitable for use under cellulose finishes.

All features

ColourWhite
Model Part NumberMPWH500
BrandRustins

Extended Product Information

FAQs

What surfaces can I use Rustins Quick Dry Metal Paint on?

You can use it on bare metal, cast iron, and galvanised metal surfaces.

Do I need to use a primer?

No, this paint can be applied directly to the metal surface without a primer.

How many coats of paint should I apply?

Two coats are recommended for adequate coverage, and three coats are recommended for improved durability.

How long does it take for the paint to dry?

It is touch-dry in about 30 minutes and recoatable in 2 hours.

Can I use this paint outdoors?

Yes, this paint is suitable for both interior and exterior use.

What is the coverage of the paint?

Coverage is approximately 14m² per litre.

How do I clean the brushes after use?

Brushes can be cleaned with water.

Is this paint low odour?

Yes, it is a low-odour water-based formula.

Troubleshooting

Paint is not drying properly.

Ensure the surface is clean and free of contaminants. Check the room temperature and ventilation. Allow sufficient drying time between coats.

Paint is peeling or flaking.

Ensure proper surface preparation, including removing loose paint or rust. Apply the paint in thin, even coats, and avoid applying too much paint at once.

Poor coverage.

Apply additional coats to achieve desired coverage. Ensure the paint is properly mixed before application.

Pros and Cons

Pros

  • Quick drying time reduces project completion time.
  • No primer needed simplifies the painting process and saves time and money.
  • Low odour makes it more pleasant to work with, especially indoors.
  • Suitable for both interior and exterior use, increasing its versatility.
  • Provides a protective and decorative satin finish.
  • Contains anti-corrosion additives to protect metal surfaces.

Cons

  • Not suitable for use under cellulose finishes, limiting its compatibility with certain projects.
  • Requires multiple coats for optimal durability.
  • Coverage is dependent on the surface and application method.
  • Limited colour options compared to some other paint types.

Setup, Compatibility & Care

Setup

  1. Surface Preparation: Ensure the metal surface is clean, dry, and free from rust, loose paint, and grease. Use a wire brush or sandpaper to remove any loose material.
  2. Application: Apply the paint directly to the metal using a brush, roller, or spray gun. Two coats are recommended for adequate coverage, and a third coat will improve durability.
  3. Drying Time: Allow the paint to dry for approximately 30 minutes to touch and 2 hours before recoating.

Compatibility

  • Suitable Surfaces: Bare metal, cast iron, and galvanised metal.
  • Not Compatible: Not suitable for use under cellulose finishes.
  • Clean Up: Clean brushes with water.

Care

  • Storage: Store the paint in a cool, dry place away from direct sunlight and extreme temperatures.
  • Maintenance: Clean the painted surface with a mild detergent and water as needed.