Bissell CrossWave HF2 Wet & Dry Vacuum Cleaner - Grey
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Bissell CrossWave HF2 is ideal for busy families looking to save time by vacuuming and washing hard floors simultaneously. This all-in-one cleaner provides the convenience of corded power and features self-propelled steering and automatic fluid delivery. Keep in mind that while it excels on sealed hard floors, it's not designed for carpets.
All features
| Colour | Grey |
|---|---|
| Series | CrossWave |
| Model Part Number | 3847E |
| Brand | Bissell |
Extended Product Information
FAQs
What surfaces can I use the CrossWave HF2 on?
The CrossWave HF2 is designed for sealed hard floors, such as tile, wood, linoleum, and laminate.
Can I use other cleaning solutions?
It is recommended to use only Bissell cleaning solutions to avoid damaging the machine and maintain its warranty.
How do I clean the machine?
After each use, empty the dirty water tank, rinse it, and clean the brush roll. Run the self-cleaning cycle. Allow all parts to dry completely.
How often should I replace the brush roll?
The brush roll should be replaced when it becomes worn or damaged, typically every 6-12 months, depending on usage.
What is the capacity of the dirty water tank?
The dirty water tank capacity is 0.58L.
Is the CrossWave HF2 suitable for pet messes?
Yes, the CrossWave HF2 can handle pet messes on sealed hard floors, but immediate cleanup is recommended to prevent stains or odors.
Troubleshooting
Device won't turn on
Check if the power cord is securely plugged into the wall outlet. Check the circuit breaker.
Poor suction
Check the dirty water tank for fullness and empty it. Clean the brush roll and the filter.
Leaves streaks on the floor
Ensure you are using the correct amount of cleaning solution. Clean the brush roll thoroughly.
Machine is making unusual noises
Check for any blockages in the brush roll or the suction path. Clean or replace the brush roll if worn.
Pros and Cons
Pros
- Saves time by vacuuming and washing simultaneously.
- Easy to maneuver due to self-propelled steering.
- The self-cleaning cycle simplifies maintenance.
- Two-Tank Technology ensures floors are cleaned with fresh water.
- Suitable for a variety of sealed hard floor surfaces.
- Quiet operation provides a more pleasant cleaning experience.
Cons
- Not suitable for carpets.
- Requires regular cleaning of the dirty water tank.
- Brush roll may need occasional untangling of hair or debris.
- Limited capacity for the dirty water tank.
- Requires specific Bissell cleaning solutions for optimal performance.
Setup, Compatibility & Care
- Assembly: The CrossWave HF2 comes partially assembled. Follow the included instructions to attach the handle and other components.
- Filling the Clean Water Tank: Fill the clean water tank with warm tap water and add the recommended amount of Bissell Multi-Surface cleaning solution. Do not use other cleaning solutions, as they may damage the machine.
- Powering On: Plug the power cord into a wall outlet and press the power button to start the cleaning process.
- Cleaning: The machine will automatically dispense the cleaning solution. Guide the cleaner across your hard floors.
- After Use: Empty the dirty water tank and rinse it out. Activate the self-cleaning cycle by pressing the button to clean the brush roll and the inside of the machine. Rinse the brush roll under running water. Allow all parts to dry completely before storing.
Compatibility
The CrossWave HF2 is designed for sealed hard floors, including:
- Ceramic tile
- Wood
- Laminate
Care
- Always use Bissell cleaning solutions to avoid damaging the machine.
- Regularly clean the brush roll, dirty water tank, and filters.
- Do not use the machine on carpets or unsealed floors.
- Store the machine in a dry place.