Dulux Trade Metalshield Gloss - Black - 1L
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone looking to protect and enhance metal surfaces using Dulux Trade Metalshield Gloss in Black. It provides up to 8 years of corrosion protection on various metal substrates. Keep in mind that this product is not suitable for high-traffic areas such as floors and stair treads.
All features
| Colour | Black |
|---|---|
| Model Part Number | 5183270 |
| Brand | Dulux Trade |
Extended Product Information
FAQs
What is the coverage rate of Metalshield Gloss?
The coverage rate is up to 13m² per litre.
How long does the paint take to dry?
It takes 1-2 hours to dry and 4-6 hours to recoat.
Can I spray this paint?
No, spray application is not recommended for health and safety reasons.
What surfaces is this paint suitable for?
It's suitable for ferrous and non-ferrous metal substrates such as railings, garage doors, lift shafts, staircases and emergency exit routes.
How should I prepare the surface before painting?
Ensure surfaces are sound, clean, and dry. Remove any loose particles or rust and degrease the surface. Apply one coat of the appropriate Dulux Trade Metalshield primer.
What kind of finish does this paint provide?
It provides a gloss finish.
How many coats of paint are required?
Apply 1 coat of the appropriate Metalshield primer followed by 2 coats of Metalshield Gloss.
How do I clean the tools after use?
After use, remove as much paint as possible from brushes or rollers before cleaning with brush cleaner.
Troubleshooting
Paint is not drying properly.
Ensure adequate ventilation and check the temperature and humidity levels. Ensure the surface is clean and primed properly.
The finish is not glossy.
Ensure the paint is stirred thoroughly before use and that two coats have been applied. Check the application method; a brush or roller is recommended.
Paint coverage is poor.
Make sure the surface is properly prepared and primed. Apply two even coats of paint, allowing adequate drying time between coats.
Pros and Cons
Pros
- Provides long-lasting protection against corrosion.
- Quick drying and recoating times save time.
- Suitable for a wide range of metal surfaces.
- Offers a durable gloss finish.
- Easy application with brush or roller.
Cons
- Not suitable for use in high-traffic areas.
- Requires a Metalshield primer for optimal results.
- Solvent-based, so adequate ventilation is required during application.
- Spray application is not recommended.
- Additional coats may be required for special process colours.
Setup, Compatibility & Care
- Surface Preparation: Ensure surfaces are clean, dry, and free from loose particles. Remove any existing rust and degrease the surface.
- Priming: Apply one coat of the appropriate Dulux Trade Metalshield primer.
- Application: Stir the Metalshield Gloss thoroughly before use. Apply two coats using a brush or roller.
- Drying Time: Allow 1-2 hours for the paint to dry and 4-6 hours for recoating.
- Tool Cleaning: Clean brushes or rollers with brush cleaner after use.
- Storage: Store in a cool, dry place and keep away from extreme temperatures.