Yamaha HS5 Powered Studio Monitor - White - HS Series
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Yamaha HS5 is a high-performance, 2-way bi-amplified near-field studio monitor designed for producers and musicians who require honest, precise, and flat reference sound in smaller home studio environments. While its compact footprint is ideal for space-constrained setups, its 5-inch woofer means it lacks the deep sub-bass extension of larger models, often requiring careful room placement or a separate subwoofer for full-range mixing.
All features
| Colour | White |
|---|---|
| Series | HS Series |
| Model Part Number | HS5 |
| Brand | Yamaha |
Extended Product Information
FAQs
Do I need a separate amplifier for the HS5?
No, the HS5 is an active (powered) monitor with internal bi-amplification, so it does not require an external amplifier.
Can I use these with a turntable?
You can, but you must connect your turntable through a phono preamp first, as these monitors require a line-level signal.
Are these speakers magnetically shielded?
The HS series is designed to minimize interference, but it is generally recommended to keep them a small distance away from CRT monitors.
Should I use balanced or unbalanced cables?
Balanced cables are strongly recommended to prevent interference and ground noise in professional studio environments.
Is the HS5 suitable for large rooms?
The HS5 is optimized for near-field listening in smaller studios; for larger rooms, you may want to consider the HS7 or HS8 models.
Troubleshooting
Humming or buzzing sound heard through speakers
Ensure you are using balanced cables and check that all audio equipment is connected to the same power circuit.
No sound output despite power LED being on
Verify that your audio interface output is set to the correct channel and check that the input level knob on the back of the HS5 is turned up.
Sound appears thin or lacks detail
Adjust the 'High Trim' or 'Room Control' switches on the back panel to better match the acoustic properties of your room.
Pros and Cons
Pros
- Extremely accurate and transparent sound signature
- Compact form factor perfect for home studios
- Sturdy, resonance-free cabinet construction
- Highly effective room adaptation controls
- Reliable bi-amplified performance
Cons
- Limited low-frequency extension due to the 5-inch woofer
- Requires balanced cables for best results in studio setups
- Lacks mounting hardware for ceiling or wall installation
Setup, Compatibility & Care
To set up your Yamaha HS5, ensure you are using balanced XLR or TRS cables to connect them to your audio interface, as this reduces the risk of electrical interference or ground loops. Once placed on dedicated studio stands or vibration-isolating pads, adjust the rear-mounted response switches according to your room's acoustic treatment.
Care instructions include:
- Keep the monitors away from direct sunlight or moisture.
- Clean the exterior surfaces with a soft, dry cloth; do not use chemical solvents.
- Ensure the rear heat sinks have at least 10cm of clearance for proper ventilation.
- Power down the speakers when not in use for extended periods to extend the lifespan of the internal electronics.