Shopping.co.uk

D-C-Fix Self-Adhesive Vinyl Wrap - White Granite Quartz

Not AvailableD-C-Fix Self-Adhesive Vinyl Wrap - White Granite Quartz
Not Available

Dc fix self-adhesive vinyl wraps are ideal for updating kitchen worktops and other surfaces around...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

This D-C-Fix Self-Adhesive Vinyl Wrap in White Granite Quartz is designed for homeowners and renters looking to refresh surfaces like kitchen worktops and furniture affordably. Its key benefit is providing a realistic, durable, and easy-to-apply granite-effect finish without the cost of replacement. A minor caveat is the heat resistance limit of 70°C, requiring the use of worktop savers for hot pans. The vinyl features a repositionable, water-based adhesive, a wipe-clean surface, and is phthalate-free, made in Germany.

All features

ColourWhite
Model Part Number200-8052-3
Brandd-c-fix

Extended Product Information

FAQs

How do I prepare the surface before applying the vinyl?

The surface must be clean, dry, and smooth. Remove any grease, dust, or old adhesive. A smooth surface is critical for good adhesion and a bubble-free finish.

Can I reapply the vinyl if I make a mistake?

Yes, the water-based adhesive is repositionable. You can gently lift and reapply the vinyl during the application process. Be careful not to stretch it excessively.

Is this vinyl suitable for use on a hob or around a sink?

The vinyl is heat resistant up to 70°C. It is not suitable for direct contact with hot pans. You must seal around hobs and sinks with silicone sealant to prevent water damage and lifting.

How do I remove the vinyl when I no longer want it?

Gently heat the vinyl with a hairdryer on a low setting. This will soften the adhesive, making it easier to peel off slowly. Avoid pulling too quickly to prevent residue.

Will this vinyl cover up minor imperfections on my surface?

The vinyl can cover minor scratches or discoloration on a smooth surface. However, significant bumps or unevenness will likely show through.

What tools do I need to apply this vinyl wrap?

Essential tools include a sharp utility cutter or craft knife, a felt edge smoother or squeegee, measuring tape, and a hairdryer for shaping.

Is this product safe for food preparation areas?

Yes, the material is phthalate-free and made in Germany. However, always use cutting boards for food preparation and worktop savers for hot pans.

What is the size of the vinyl roll?

This item is professionally cut from a master roll and repackaged. The dimensions provided for this specific listing are H:300 x W:67.5 x D:0 cm. It is not a factory-sealed retail roll.

Troubleshooting

Air bubbles or creases after application

Gently lift the vinyl back to the point of the bubble/crease and reapply, smoothing from the center outwards. For persistent bubbles, a small pinprick can release trapped air.

Vinyl not sticking properly

Ensure the surface is thoroughly clean, dry, and smooth. Reheat the vinyl gently with a hairdryer and press down firmly. If the adhesive is old, it may have lost tack.

Difficulty applying around curves

Use a hairdryer on a low setting to warm the vinyl, making it more pliable. Stretch and mould it gently around the curve, holding it in place until it cools.

Water getting under the edges

Carefully lift the edge and ensure the surface is dry. Apply a bead of silicone sealant around sinks, hobs, or other wet areas after the vinyl has been applied.

Vinyl lifting at edges

Gently heat the edges with a hairdryer and press them down firmly. If the surface is compromised or moisture is an issue, ensure proper sealing as per care instructions.

Pros and Cons

Pros

  • Budget-friendly way to update kitchen worktops and furniture
  • Easy to apply by yourself with simple tools
  • Removable, making it suitable for rental properties
  • Realistic and attractive granite quartz design
  • Durable and easy to maintain with a wipe-clean surface
  • Repositionable adhesive allows for error correction during application

Cons

  • Heat resistant only up to 70°C, requiring protection from hot pans
  • Requires careful sealing around sinks and hobs to prevent water ingress
  • May require patience and a hairdryer for complex curves or corners
  • Not a permanent solution and may show wear over extended periods of heavy use
  • Requires a smooth, clean, and dry surface for optimal adhesion

Setup, Compatibility & Care

Setup: Ensure the surface is clean, dry, and smooth. Use a mild cleaning solution if necessary and allow it to dry completely. Measure and cut the vinyl using the grid on the reverse. Peel back a small section of the backing paper and carefully align the vinyl. Gradually peel off the backing paper while smoothing the vinyl onto the surface with a felt edge smoother, working from the center outwards to remove air bubbles. For curved edges, use a hairdryer on a low setting to gently warm and mould the vinyl. Trim any excess material with a sharp utility cutter.

Compatibility: The vinyl can be applied to any flat, non-porous surface, including countertops, tabletops, furniture, cabinet doors, and shelves. It is not recommended for textured, uneven, or freshly painted surfaces.

Care: Wipe clean with a damp cloth. Promptly wipe up spills to prevent staining. Avoid abrasive cleaners or scouring pads. Use worktop savers for hot pans (above 70°C) and cutting boards for food preparation. It is essential to seal around sinks and hobs with a suitable silicone sealant to prevent water from getting underneath the vinyl and causing it to lift.