Citadel Martian Ironearth Technical Paint - 24ml
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
Citadel Martian Ironearth Technical Paint is designed for miniature painters and hobbyists who want to achieve professional-looking, realistic cracked-earth bases on their models with minimal effort. This water-based acrylic medium offers a swift solution for adding texture to plastic, metal, and resin miniatures, featuring a unique microbead composition that creates a natural, flat surface. While it provides excellent coverage over both black and white undercoats, users should note that the final texture is dependent on the thickness of the application, which may require some experimentation to master.
All features
| Model Part Number | 27-24 |
|---|---|
| Brand | Citadel |
Extended Product Information
FAQs
Can I use this on a model that is not a base?
While intended for bases, you can use it on terrain pieces or dioramas to achieve the same cracked-earth effect.
Does it need to be painted over once dry?
No, it dries to a finished color, though you can use washes or dry-brushing to add further depth and highlights to the cracks.
Is it compatible with Citadel spray primers?
Yes, it is fully compatible with both Citadel Chaos Black and Corax White primers.
How long does it take to crack?
Cracking typically begins as the paint dries, usually becoming visible within 30 to 60 minutes depending on ambient humidity.
Can I mix this with other technical paints?
It is not recommended to mix this directly with other paints, as it will disrupt the chemistry required for the cracking effect.
Troubleshooting
The paint is not cracking as expected.
The layer may be too thin. Apply a slightly thicker coat to allow the medium to pull apart as it dries.
The paint feels too thick in the pot.
Add one drop of distilled water and stir gently. Do not over-dilute, as this can prevent proper cracking.
The texture flakes off after drying.
Ensure the surface was clean and primed before application. You may apply a thin coat of matte varnish over the top to seal the finish.
Pros and Cons
Pros
- Creates instant, highly realistic cracked-earth textures
- Works well on diverse base materials like plastic and resin
- Non-toxic and water-based for safer handling
- Consistent results over various primer colors
Cons
- Drying time can be lengthy depending on layer thickness
- Cracking pattern is influenced by the amount of paint applied
- Requires careful storage to prevent the pot from drying out
Setup, Compatibility & Care
Before starting, ensure your base is primed and free of dust. Use a dedicated technical brush to apply the medium, as the microbeads can wear down finer bristles over time. Always seal your finished base with a matte varnish if the model will see heavy handling, as the cracked effect is fragile and can chip if abraded.
Store the 24ml pot in a cool, dry place and ensure the lid is snapped completely shut after each use. If the paint feels slightly thick, you can add a single drop of distilled water to rejuvenate the consistency, though adding too much water may interfere with the cracking chemistry.