2 Way Quick Wire Connector - TIGER POWER SUPPLIES - TGR-QC-2-2
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone using the TGR-QC-2-2 quick wire connector from TIGER POWER SUPPLIES. It offers a fast, tool-free way to connect wires, saving time during installation. However, it's essential to ensure the correct wire gauge is used to avoid connection issues.
All features
| Model Part Number | TGR-QC-2-2 |
|---|---|
| Brand | TIGER POWER SUPPLIES |
Extended Product Information
FAQs
What is the rated voltage of the connector?
The TGR-QC-2-2 is rated for 250V.
What is the rated current of the connector?
The TGR-QC-2-2 is rated for 32A.
What wire gauge is compatible?
It is compatible with wires from 0.08mm² to 2.5mm² / 28AWG to 12AWG.
How do I strip the wires?
Strip the wire to a length of 9mm.
Can I use this connector for outdoor applications?
The connector is not specifically designed for outdoor use and should be protected from the elements.
How many wires can I connect with one connector?
Each TGR-QC-2-2 connector can connect two wires.
Are tools required for installation?
No, the TGR-QC-2-2 features lever termination, which means no tools are required.
Troubleshooting
Connection is loose.
Ensure the wires are stripped to 9mm and inserted fully. Re-close the lever firmly.
Connector does not accept the wire.
Verify the wire gauge is within the 0.08mm² to 2.5mm² (28AWG to 12AWG) range.
Wires are difficult to insert.
Make sure the wire ends are straight and not frayed before insertion.
Pros and Cons
Pros
- Saves time with lever termination.
- Easy to use, no tools required.
- Suitable for a wide range of wire gauges.
- Compact size for easy installation.
- Reliable screwless connection.
Cons
- Requires a specific wire strip length (9mm).
- Limited to 2-wire connections.
- May not be suitable for all types of electrical applications.
Setup, Compatibility & Care
- Preparation: Ensure the power is off before starting. Gather the TGR-QC-2-2 connectors and the wires you intend to connect.
- Wire Stripping: Strip the wires to a length of 9mm using a wire stripper.
- Connection: Open the lever on the connector. Insert the stripped wire into the connector hole. Close the lever to secure the connection. Repeat for the second wire.
- Compatibility: These connectors are compatible with solid, stranded, and flexible wires within the 0.08mm² to 2.5mm² (28AWG to 12AWG) range. Ensure wires are clean and free of corrosion.
- Care: Regularly inspect the connections for any signs of damage or loosening. Avoid exposing the connectors to extreme temperatures or moisture. Do not exceed the rated voltage (250V) or current (32A).