Howard Products Inc FW0016
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
Howard Feed-N-Wax Wood Polish & Conditioner is designed for homeowners and wood enthusiasts seeking to restore and protect wooden furniture, antiques, and cabinets. Its primary benefit is enhancing the natural grain depth while providing a protective sheen with beeswax and carnauba wax. A potential caveat is that it may leave a slight residue if over-applied on unfinished wood. This product nourishes wood with essential oils, preventing dryness, fading, and cracking, all while imparting a beautiful luster.
All features
| Model Part Number | FW0016 |
|---|---|
| Brand | Howard Products Inc |
Extended Product Information
FAQs
What types of wood can I use Howard Feed-N-Wax on?
Howard Feed-N-Wax is best suited for finished wood surfaces such as furniture, antiques, and cabinets. It works well on wood with oil, lacquer, varnish, or shellac finishes. Always test in an inconspicuous area first.
Can I use this on unfinished or raw wood?
It is not recommended for unfinished or raw wood as it may be absorbed unevenly or alter the color significantly. Always test on a hidden spot first if you intend to use it on such surfaces.
How often should I reapply Feed-N-Wax?
Reapplication frequency depends on the wood's condition and environment. Typically, reapply every 3 to 6 months, or whenever the wood starts to look dry or dull.
Will this product remove scratches?
Feed-N-Wax is designed to condition and protect wood, not to fill or remove scratches. While it can make minor surface blemishes less noticeable by improving the overall finish, it will not repair deep scratches.
Does Feed-N-Wax leave a sticky or greasy residue?
If applied correctly and buffed off thoroughly, Feed-N-Wax should leave a protective luster, not a sticky or greasy residue. Excess product that is not buffed away can cause a waxy buildup.
What is the scent of this product?
The product contains orange oil, which gives it a noticeable citrus scent during application. This scent typically dissipates once the product has dried and buffed.
Is this product safe to use around children and pets?
Once the product has been applied and buffed dry, it is generally considered safe for normal use. However, keep the product itself out of reach of children and pets during application and storage.
Troubleshooting
Product leaves a white or cloudy residue.
Too much product was applied, or it was not buffed off sufficiently. Apply a small amount of mineral spirits to a clean cloth and wipe the affected area. Then, buff with a clean, dry cloth.
Wood looks too dark after application.
The product may darken lighter woods. Buff vigorously with a clean, dry cloth to remove excess. If the darkening is significant, consider reapplying a lighter-duty wood polish or using a minimal amount of Feed-N-Wax in the future.
The wood still appears dry after application.
The wood may be extremely dry and require a second application. Ensure all excess from the first application was removed, then apply a thin second coat, allowing it to penetrate and buffing off thoroughly.
Product is difficult to spread evenly.
The wood surface may be too dry or have an incompatible finish. Ensure the cloth is slightly damp (not wet) with the product, and try applying in smaller sections. If the finish is problematic, consult the furniture manufacturer's recommendations.
Pros and Cons
Pros
- Effectively revives dull or dry wood.
- Provides a durable protective layer.
- Enhances the natural appearance of wood grain.
- Helps prevent common wood damage like cracking and fading.
- Suitable for a wide range of wood finishes and types.
Cons
- May leave a waxy residue if too much is applied.
- Not recommended for unfinished or raw wood without testing first.
- Requires periodic reapplication for continued protection.
- The orange oil scent may be strong for some individuals.
- Can slightly darken lighter wood tones.
Setup, Compatibility & Care
Setup:
No complex setup is required. Ensure the wood surface is clean and dry before application.
Compatibility:
This product is ideal for furniture, antiques, cabinets, and other finished wood surfaces. It works well on wood with oil, lacquer, varnish, or shellac finishes. Test on an inconspicuous area first, especially on lighter woods or unfinished surfaces, to ensure desired results and color compatibility.
Care:
- Application: Apply a small amount to a clean, soft cloth. Wipe the wood surface, applying moderate pressure and following the direction of the wood grain.
- Penetration: Allow the product to penetrate the wood for approximately 10-20 minutes.
- Buffing: Use a separate clean, soft cloth to buff off any excess product and bring out the luster.
- Maintenance: Reapply as needed, typically every 3-6 months, or when the wood appears dry or dull.
- Storage: Store the container in a cool, dry place away from direct sunlight.