ZX1 Extralube Engine Friction Reducer - 100ml
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The ZX1 Extralube Engine Friction Reducer is for vehicle owners and mechanics seeking to enhance engine and gearbox longevity and efficiency. Its key benefit is significantly reducing friction on metal surfaces, leading to improved fuel economy and lower emissions. A caveat is that it is a supplementary treatment and does not replace regular oil changes. This 100ml product is a micro oil metal treatment that chemically bonds to metal, smoothing and lubricating to reduce wear, protect during cold starts, and extend component life for up to 25,000 miles.
All features
| Model Part Number | ZX1733081-X2/AKN |
|---|---|
| Brand | ZX1 |
Extended Product Information
FAQs
How much ZX1 Extralube do I need for my car?
The standard 100ml bottle is typically sufficient for most passenger car engines up to 5 liters of oil capacity. For larger engines or gearboxes, consult the product's specific dosage guide or the manufacturer's recommendations.
Can I use ZX1 Extralube in my motorcycle?
Yes, it is suitable for motorcycle engines and gearboxes, provided the oil systems are separate. If your motorcycle has a shared engine/gearbox oil system, use the recommended engine oil additive dosage.
Does this product change my oil?
No, ZX1 Extralube does not change the base properties of your engine oil or gearbox oil. It works by treating the metal surfaces themselves.
How often should I reapply ZX1 Extralube?
The treatment provides protection for up to 25,000 miles. Reapplication is recommended at or before this mileage interval, ideally during a routine oil change.
Will this void my vehicle's warranty?
ZX1 Extralube is a supplementary treatment that does not alter the specifications of approved lubricants. However, always refer to your vehicle manufacturer's warranty terms regarding aftermarket additives.
Is it safe for diesel particulate filters (DPF)?
ZX1 Extralube is designed to be ashless and should not adversely affect DPFs. However, always check compatibility with specific vehicle systems if you have concerns.
What is the difference between ZX1 and other oil additives?
ZX1 Extralube is a micro oil metal treatment that chemically bonds to metal surfaces, creating a friction-reducing layer. Many other additives primarily alter oil properties.
Troubleshooting
No noticeable difference in performance.
Ensure the correct dosage was used and the product has had sufficient time to circulate and bond (at least 20 minutes of driving). Performance improvements can be subtle and cumulative. Check for other maintenance needs on the vehicle.
Difficulty adding to gearbox.
Ensure you are using the correct filler point for your gearbox. If the opening is small, a small funnel or syringe may be required. Refer to your vehicle's manual for the correct procedure.
Product appears to have separated in the bottle.
This is normal for micro-lubricant treatments. Shake the bottle vigorously before use to re-emulsify the contents.
Pros and Cons
Pros
- Reduces friction on engine and gearbox metal surfaces.
- Can lead to improved fuel efficiency (increased MPG).
- Helps lower harmful exhaust emissions.
- Offers superior protection during cold engine starts.
- Provides long-lasting protection, up to 25,000 miles.
- Enhances the longevity of mechanical components.
Cons
- Requires initial application and periodic reapplication.
- Results may vary based on vehicle age and condition.
- Does not replace the need for regular oil changes.
- Specific application ratios are critical for optimal performance.
- May not be suitable for all specialized or high-performance lubrication systems without prior consultation.
Setup, Compatibility & Care
Setup:
- Ensure the engine or gearbox is at operating temperature before application for optimal bonding.
- Add the recommended dosage of ZX1 Extralube directly into the engine oil filler cap (for engines) or the gearbox oil filler plug (for manual gearboxes).
- For engines, it is recommended to add ZX1 Extralube during an oil change. Drive the vehicle for at least 15-20 minutes to allow the product to circulate and bond to all metal surfaces.
Compatibility:
- ZX1 Extralube is compatible with all mineral, synthetic, and semi-synthetic engine oils and gearbox oils.
- It is suitable for use in petrol, diesel, and LPG engines, as well as manual and automatic transmissions.
- This product is not designed to alter the fundamental properties of the base lubricant but to enhance its performance through surface treatment.
Care:
- ZX1 Extralube is a treatment that provides protection for up to 25,000 miles. Reapplication is recommended at or before this mileage interval, ideally during a routine oil change for engines.
- Store the product in a cool, dry place away from direct sunlight.