Shopping.co.uk

Tetrion White Powerfil 250g - Tetrion Fillers

Not AvailableTetrion White Powerfil 250g - Tetrion Fillers
Not Available
Not Available

Tetrion Powerfil is a super smooth multi-purpose filler, ideal for large and small jobs. It sets i...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

This guide is for anyone looking to repair surfaces with Tetrion Powerfil. Powerfil provides a super smooth, rapid-cure solution for filling holes, cracks, and imperfections on various surfaces, offering a tough and sandable finish. Note that accurate mixing of the hardener is crucial for optimal results.

All features

Model Part NumberTettpw250
BrandTetrion Fillers

Extended Product Information

FAQs

How long does Tetrion Powerfil take to set?

It sets in minutes, and is sandable after about 20 minutes at 18°C/65°F.

What surfaces can I use Tetrion Powerfil on?

It is suitable for metal, wood, stone, and most plastics.

Can I paint over Tetrion Powerfil?

Yes, it can be painted with all paint types once fully cured.

What is the mixing ratio for the hardener and filler?

Mix 1 part hardener to 50 parts filler (pea: golfball) or 2%.

Can I use Tetrion Powerfil outdoors?

Yes, it is suitable for both indoor and outdoor use.

What should I do if I use too much hardener?

Never use too much hardener.

What should I do with unused paste?

Never return unused paste to the tin.

Troubleshooting

Filler not setting.

Ensure the correct ratio of hardener to filler has been used. Check the expiry date of the product. Ensure the temperature is within the recommended range (18°C/65°F).

Filler is too soft after curing.

Ensure the mixture was thoroughly mixed. Make sure that the correct amount of hardener was used. Allow more time for curing, if needed.

Difficulty sanding.

Allow the filler to cure completely before sanding. Use appropriate sandpaper grit for the job.

Pros and Cons

Pros

  • Rapid setting time.
  • Suitable for multiple surfaces.
  • Creates a smooth and paintable finish.
  • Strong and durable.
  • Easy to apply and sand.

Cons

  • Requires accurate mixing of hardener.
  • Setting time is affected by temperature.
  • Unused paste should not be returned to the tin.
  • Requires good ventilation during use.

Setup, Compatibility & Care

  1. Preparation: Clean the surface, removing dirt, grease, moisture, and loose material.
  2. Mixing: Mix 1 part hardener to 50 parts filler (pea: golfball) or 2%. Mix thoroughly.
  3. Application: Apply the mixture immediately with the spreader provided.
  4. Curing: Allow to cure for approximately 20 minutes at 18°C/65°F before sanding.
  5. Conditions: Best used in warm, dry, and well-ventilated conditions.
  6. Compatibility: Compatible with metal, wood, stone, and most plastics. Can be painted with all paint types.