Liberon Finishing Oil - 500ml
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone looking to protect and enhance their interior wood surfaces using Liberon Finishing Oil. The oil nourishes and beautifies wood, offering customizable finishes from matt to gloss. A key benefit is its resistance to water, alcohol, and food acid marks, ideal for high-traffic areas. However, proper application and drying times are crucial for achieving the desired results.
All features
| Model Part Number | 122004 |
|---|---|
| Brand | Liberon |
Extended Product Information
FAQs
How many coats of oil should I apply?
Apply multiple coats to achieve your desired finish. For a matt finish, one or two coats may be sufficient. For a gloss finish, apply several coats and finish with a paste wax.
How long does the oil take to dry?
Drying time is approximately 5 hours per coat.
Can I use Liberon Finishing Oil on exterior wood?
No, this oil is designed for interior use only.
How do I clean the tools after use?
Clean brushes and cloths with white spirit immediately after use.
Is Liberon Finishing Oil safe for use on children's toys?
Yes, it is EN 71 Approved and safe for use on toys.
What surfaces can I use Liberon Finishing Oil on?
It's suitable for interior wood, cork, stone, and terracotta.
Can I apply another finish over Liberon Finishing Oil?
For a gloss finish, apply a paste wax after the oil has dried.
Troubleshooting
Oil is not drying properly.
Ensure adequate ventilation and a room temperature above 18°C. Apply thin coats and allow sufficient drying time.
Finish is not smooth.
Lightly sand the surface between coats and apply the oil evenly.
White marks appear after cleaning.
Wipe up spills immediately with a clean, damp cloth.
Pros and Cons
Pros
- Enhances and protects wood surfaces.
- Offers a range of finishes from matt to gloss.
- Resistant to water, alcohol, and food acids.
- Safe for use on various surfaces, including toys.
Cons
- Requires multiple coats for gloss finishes.
- Drying time is approximately 5 hours per coat.
- Tools require cleaning with white spirit.
Setup, Compatibility & Care
- Preparation: Ensure the wood surface is clean, dry, and free from old finishes. Lightly sand the surface if needed.
- Application: Apply the oil with a brush or cloth, following the grain of the wood. Apply thin, even coats.
- Drying: Allow each coat to dry for approximately 5 hours before applying the next coat or a paste wax.
- Compatibility: Suitable for interior wood care and turned woodwork, as well as cork, stone, and terracotta.
- Care: Clean tools with white spirit after use. Wipe up spills immediately. For a gloss finish, apply a paste wax after the oil has dried.