Permatex Threadlock High Strength Fast Acting Nut & Bolt Thread Lock Sealant - Red
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for users seeking a robust solution for permanently securing threaded fasteners and press fits, particularly in heavy-duty applications. Permatex High-Strength Threadlocker Red provides exceptional holding power, resisting vibration and loosening. Keep in mind that removal may require heat or specialized tools.
All features
| Colour | Red |
|---|---|
| Brand | Permatex |
Extended Product Information
FAQs
What is the primary use of Permatex High-Strength Threadlocker Red?
It is designed for permanently locking studs and press fits in heavy-duty applications, providing resistance to vibration and loosening.
What size fasteners is this threadlocker suitable for?
It is suitable for fasteners ranging from 3/8" to 1" (10mm to 25mm).
Does this product require any special tools for application?
No, but removal may require heat or special tools.
How do I remove parts secured with this threadlocker?
Heat may be required to soften the threadlocker and make disassembly possible. Special tools may also be needed.
Can I use this product on all types of metals?
It is generally compatible with most metals, but it's always best to test on a small area first.
How should I store Permatex High-Strength Threadlocker Red?
Store it in a cool, dry place and avoid extreme temperatures.
What is the holding power of this threadlocker?
It adds 3,000 PSI holding power to slip and press fit assemblies.
Troubleshooting
Fastener won't budge after application.
Apply heat to the fastener using a heat gun or torch. Use appropriate tools to remove the fastener.
Threadlocker is not holding.
Ensure surfaces were properly cleaned and prepped. Verify that the correct product was used for the application.
Pros and Cons
Pros
- Provides a strong, permanent bond.
- Resists loosening from vibration.
- Eliminates the need for set screws or snap rings in some applications.
- Effective on a variety of materials used in automotive and industrial settings.
Cons
- Requires heat or special tools for removal.
- Not suitable for applications requiring frequent disassembly.
- Can be difficult to remove if over-applied.
Setup, Compatibility & Care
- Preparation: Clean and degrease the threads thoroughly before application.
- Application: Apply Permatex High-Strength Threadlocker Red to the threads of the fastener.
- Assembly: Assemble the parts and tighten to the manufacturer's specifications.
- Curing Time: Allow the threadlocker to fully cure before stressing the joint. Cure times can vary, so consult the product specifications for details.
Compatibility: This product is generally compatible with most metals. Always test on a small, inconspicuous area first.
Care: Store in a cool, dry place. Avoid prolonged exposure to extreme temperatures.