Sentinel X300 Cleaner for New Systems - 1L
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Sentinel X300 Cleaner is designed for new central heating systems, effectively removing installation debris and preparing your system for optimal performance. It's ideal for those setting up new heating systems and looking to ensure longevity. A key thing to remember is that it's designed specifically for systems up to 6 months old. It removes flux installation debris and grease for peak system function.
All features
| Model Part Number | X300 |
|---|---|
| Brand | Sentinel |
Extended Product Information
FAQs
How much X300 do I need?
A single 1-liter bottle is sufficient for systems with approximately 8 to 10 radiator panels.
When should I use Sentinel X300?
Use it when installing a new central heating system, ideally within the first 6 months of operation, to remove installation debris.
How long should the cleaner circulate in the system?
Refer to the product instructions, but typically during the normal operation of your heating system.
Do I need to flush the system after using X300?
Yes, it is essential to drain and flush the system after cleaning to remove all residues.
Can I use X300 in an old system?
No, X300 is specifically designed for new systems and is most effective within the first 6 months of operation.
What should I do after cleaning with X300?
After cleaning and flushing, refill the system and add an inhibitor, such as Sentinel X100, to protect it.
Is X300 safe for all types of radiators?
Yes, X300 is designed to be compatible with a variety of radiator materials.
Troubleshooting
Cleaner not circulating properly.
Check for airlocks in the system and bleed radiators if necessary. Ensure the pump is functioning correctly.
System still shows debris after cleaning.
The system might require a second dose or a more thorough flush. Check for any blockages and ensure the correct dosage was used.
Leaks after cleaning.
Inspect all connections and radiator valves for leaks. Tighten any loose connections and consider replacing faulty components.
Pros and Cons
Pros
- Cleans new central heating systems up to 6 months old.
- Removes a wide range of contaminants, including flux and grease.
- Prepares the system for inhibitor, extending component life.
- Helps prevent sludge and scale buildup.
- Easy to use with included adapter or dosing vessel.
Cons
- Only effective for systems up to 6 months old.
- Requires the system to be filled before adding the cleaner.
- May require additional inhibitor after cleaning.
Setup, Compatibility & Care
Setup
- Ensure the central heating system is filled with water before adding X300.
- Add the cleaner via a dosing vessel or the provided adaptor.
- Follow the product instructions for circulation time, typically during normal system operation.
- After cleaning, drain and flush the system thoroughly.
- Refill the system and add an inhibitor.
Compatibility
- Designed for use in new central heating systems.
- Suitable for systems up to 6 months old.
- Compatible with various radiator materials.
Care
- Always follow the manufacturer's guidelines for dosage and application.
- Wear appropriate protective equipment, such as gloves, during handling.
- Avoid contact with skin and eyes.
- Dispose of the product and packaging responsibly, according to local regulations.