VMS Flexy 5K Glue - Black - CM11
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for modelers and hobbyists who need a reliable adhesive for photo-etched parts. The VMS Flexy 5K Glue, a BLACK THIN CA glue, offers a flexible bond, making your work more productive and enjoyable by reducing the need to re-glue fragile parts. Keep in mind that while it's less aggressive than standard CA glues, proper ventilation is always recommended when using any CA glue.
All features
| Colour | Black |
|---|---|
| Model Part Number | CM11 |
| Brand | VMS |
Extended Product Information
FAQs
What materials can I use this glue on?
The VMS Flexy 5K Glue is primarily designed for use on polystyrene (PS) and metal parts.
How long is the open time?
The open time is 150% longer than that of standard CA glues, allowing for good part positioning.
Is this glue aggressive to plastic?
No, it is less aggressive than classic CA glues, reducing the risk of it "eating" the plastic.
What should I do if the glue bonds to my skin?
Soak the area in warm, soapy water and gently try to separate the surfaces. Do not force them apart. Seek medical attention if necessary.
How should I store the glue?
Store in a cool, dry place, away from direct sunlight, with the cap tightly sealed.
What is the primary benefit of using this glue?
The primary benefit is the flexible bond, which reduces the likelihood of parts breaking and makes model building more enjoyable.
Can I use this for larger projects?
Yes, but be aware of the drying time and consider using a larger amount if the pieces are bigger. Make sure it won't be too runny for the task.
Troubleshooting
Glue is not bonding properly.
Ensure surfaces are clean and free of contaminants. Make sure you are using an adequate amount of glue. Check the expiration date. Try roughening the surfaces slightly to improve adhesion.
Glue is drying too quickly.
Ensure you are working in a cool environment and away from direct sunlight. Consider using a slower-setting CA glue for longer working times.
Glue has bonded to skin.
Soak the area in warm, soapy water. Gently try to peel the bonded surfaces apart. Do not force them apart. If it doesn't separate, seek professional medical attention.
Pros and Cons
Pros
- Flexible bond reduces part loss and breakage.
- Thin viscosity allows for precise application and control.
- Extended open time aids in the accurate positioning of parts.
- Works well with both PS and metal materials.
- Less aggressive formula minimizes plastic damage.
- Black color helps in part alignment.
Cons
- Requires proper ventilation due to CA glue components.
- Can still bond skin and other surfaces if not handled with care.
- Drying time is still relatively quick, so precise placement is necessary.
- The thin viscosity may be prone to running or dripping if not applied carefully.
- Requires appropriate storage to maintain its properties.
Setup, Compatibility & Care
- Preparation: Ensure surfaces are clean and free of dust, grease, or other contaminants. A clean surface promotes better adhesion.
- Application: Apply a small amount of glue to one of the surfaces to be joined. The thin viscosity allows for precise application, so avoid over-application.
- Assembly: Carefully align the parts and hold them together until the glue sets. The extended open time allows for adjustment.
- Compatibility: This glue is compatible with polystyrene (PS) and metal parts. Always test on a small, inconspicuous area first if using with unfamiliar materials.
- Care: Store the glue in a cool, dry place away from direct sunlight. Ensure the cap is tightly sealed to prevent the glue from drying out. Avoid contact with skin and eyes; use in a well-ventilated area.