Bosch Gas Hob - Black

Stainless steel hob with knob controls located to the front of the hob. This 4 burner gas hob feat...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

This guide is for anyone using the Bosch Black Gas Hob (PCP6A6B90), offering precise flame control and efficient cooking. The key benefit is its FlameSelect technology for consistent results, however, users should be aware that proper ventilation is crucial when using gas hobs. This 60 cm built-in gas hob features four burners, including a high-speed burner and simmer burner, with cast iron pan supports and front rotary controls.

All features

ColourBlack
Model Part NumberPCP6A6B90
BrandBosch

Extended Product Information

FAQs

How do I clean the hob?

Wipe the hob with a damp cloth and mild detergent after each use. For tougher stains, use a non-abrasive cleaner. Avoid using abrasive pads or steel wool.

What kind of gas can I use?

The hob is designed for use with natural gas. An LPG conversion kit is included to allow use with LPG.

How do I use the FlameSelect feature?

Turn the control knob to the desired power level. The hob has nine defined power levels, providing precise heat control.

What do I do if the flame goes out?

The flame failure device will automatically cut off the gas supply. Turn off the burner, allow it to cool, and then try re-lighting it. If the issue persists, check the gas supply and burner components.

Can I replace the pan supports?

Replacement pan supports may be available from Bosch or authorized service centers. Contact Bosch customer service for further assistance.

What is the warranty?

This gas hob comes with a 2-year warranty.

Where can I find the serial number?

The serial number is located on the rating plate of the hob.

Troubleshooting

Burner won't light.

Check the gas supply and ensure the burner head is clean and properly seated. Make sure the electronic ignition is working and the power is connected. If using LPG, confirm the conversion is correctly installed.

Flame is too high or low.

Adjust the heat setting using the FlameSelect controls. The hob has nine power levels, so fine-tuning is possible.

Hob is not level.

Ensure the hob is properly installed within the counter cut-out and that the supporting surface is even. Check the hob's legs for adjustment options if applicable.

Burner flame is uneven.

Clean the burner head thoroughly to remove any food debris or blockages that may be causing the uneven flame. Ensure the burner cap is correctly positioned.

Pros and Cons

Pros

  • Precise heat control with FlameSelect technology.
  • Durable cast iron pan supports.
  • Easy-to-use front controls.
  • Flame failure device for enhanced safety.
  • Includes LPG conversion kit for different gas types.

Cons

  • Requires professional installation.
  • Gas hobs require adequate ventilation.
  • Surface can be harder to clean compared to induction hobs.
  • May require specific cookware depending on the burner sizes.

Setup, Compatibility & Care

Setup

  1. Installation: The hob must be installed by a qualified professional according to local regulations. Ensure the hob is correctly connected to the gas supply and electrical outlet.
  2. Cut-Out Dimensions: The hob is designed for built-in installation; refer to the product specifications for exact cut-out dimensions.
  3. LPG Conversion: If using LPG, follow the instructions in the included conversion kit to adjust the burners.

Compatibility

  • Gas Type: Compatible with natural gas and LPG (with the provided conversion kit).
  • Electrical: Requires a 220-240 V, 50-60 Hz electrical connection.
  • Placement: Designed for built-in placement.

Care

  1. Cleaning: Clean the hob after each use. Use a damp cloth with mild detergent. Avoid abrasive cleaners.
  2. Pan Supports: Clean the cast iron pan supports regularly with warm, soapy water. Dry them thoroughly to prevent rust.
  3. Burners: Regularly clean the burner heads to ensure efficient gas flow. Remove any food debris or blockages.
  4. Wipe spills immediately: To avoid stains and damage to the surface.