Safeguard Roxil Enhanced Decking Oil - 5L
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone looking to maintain and protect their garden decking using Roxil Decking Oil. The primary benefit is enhanced wood grain, restored timber appearance, and protection against the elements, including rain and UV damage. However, it's important to note that proper surface preparation is crucial for optimal results. This guide will cover everything from key features and benefits to application and troubleshooting, ensuring you get the most out of your Roxil Decking Oil.
All features
| Brand | Roxil |
|---|
Extended Product Information
FAQs
How often should I reapply Roxil Decking Oil?
Reapplication is typically needed every 1-2 years, depending on weather exposure and wear.
Can I apply Roxil Decking Oil to wet wood?
No, the wood must be completely dry before application for the best results.
How much coverage can I expect from a 5L container?
You can expect approximately 30m² of coverage with two coats.
What kind of finish does Roxil Decking Oil provide?
It leaves a clear, matte finish, highlighting the natural wood grain.
Is Roxil Decking Oil suitable for all types of wood?
Yes, it is suitable for all types of wooden decking.
How long does it take for Roxil Decking Oil to dry?
It typically dries within a few hours, but allow 24 hours before heavy use or exposure to rain.
Do I need to sand the decking before applying the oil?
Light sanding is recommended to ensure the oil adheres properly, especially if the wood is weathered.
How do I clean my decking after applying the oil?
Use a mild soap and water solution. Avoid harsh chemicals or abrasive cleaners.
Troubleshooting
Oil is not penetrating the wood.
Ensure the wood is clean, dry, and properly prepared. Lightly sand the surface if needed.
Uneven application or streaks appear.
Apply the oil evenly, following the wood grain. Avoid applying too much oil at once.
Decking appears slippery after application.
Ensure you have not over-applied the oil and allow sufficient drying time. Consider using a non-slip additive.
Water is not beading on the surface.
Ensure the oil is fully cured. Reapply if necessary, ensuring the surface is properly cleaned and prepared.
Pros and Cons
Pros
- Restores weathered wood, improving its appearance.
- Provides significant protection against rain and UV damage.
- Durable formula helps prevent common decking problems like rot and mold.
- Easy application with visible results in hours.
- Enhances and maintains the natural beauty of the wood.
- Breathable film allows the wood to naturally move and breathe.
Cons
- Requires proper surface preparation for optimal results.
- May require multiple coats for full protection.
- Coverage can vary based on wood type and condition.
- Application in direct sunlight may affect performance.
- Needs periodic reapplication to maintain protection.
Setup, Compatibility & Care
- Preparation:
- Clean the decking thoroughly, removing any dirt, algae, or old coatings.
- Allow the wood to dry completely before application.
- Lightly sand the surface to ensure proper adhesion.
- Application:
- Apply the oil evenly using a brush or roller, following the wood grain.
- Apply two coats, allowing the first coat to dry before applying the second.
- Coverage is approximately 6m² per litre, but this may vary.
- Compatibility:
- Suitable for all types of wooden decking.
- Test on a small, inconspicuous area first to ensure compatibility.
- Care:
- Clean the decking regularly with a mild soap and water solution.
- Reapply the oil as needed to maintain protection and appearance, typically every 1-2 years.