Tamiya Spray Paint - French Blue - 100ml
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Tamiya TS spray paint in French Blue is designed for model enthusiasts seeking a quick-drying, high-quality finish for large model surfaces. Its synthetic lacquer formula provides excellent coverage, making it ideal for achieving smooth, even coats. However, users should be aware that proper ventilation is crucial due to the nature of solvent-based paints.
All features
| Model Part Number | 85010 |
|---|---|
| Brand | Tamiya |
Extended Product Information
FAQs
What is the best way to apply Tamiya TS French Blue spray paint?
Shake the can vigorously for at least a minute. Apply in light, even coats from a distance of about 20-30 cm, using a steady back-and-forth motion. Allow brief drying time between coats.
How long does Tamiya TS spray paint take to dry?
The paint is touch-dry in a short period, typically 15-30 minutes. Full curing to achieve maximum hardness takes longer, often 24 hours or more, depending on temperature and humidity.
Can I use Tamiya TS French Blue on plastic models?
Yes, it is designed for plastic models. However, for best results and to prevent potential damage to certain plastics, using a Tamiya primer is highly recommended.
How do I clean a clogged nozzle?
After use, invert the can and spray for a few seconds to clear the nozzle. If it remains clogged, you can try soaking the nozzle in Tamiya lacquer thinner or isopropyl alcohol, then clear it again by spraying.
Is ventilation important when using this spray paint?
Yes, absolutely. This is a solvent-based lacquer and should only be used in a well-ventilated area to avoid inhaling fumes and to ensure proper drying.
What is the paint volume in the can?
Each can contains 100ml of Tamiya TS spray paint.
Troubleshooting
Uneven spray or sputtering
Ensure the can is shaken thoroughly. Clear the nozzle by inverting the can and spraying briefly. If clogged, try cleaning with lacquer thinner (use caution).
Paint is too thin or not covering well
Apply multiple light coats rather than one heavy coat. Ensure adequate shaking of the can. Consider using a primer for better opacity.
Runs or drips in the paint finish
Hold the can at the recommended distance (approx. 20-30 cm). Apply in light, even coats with a steady motion. Avoid spraying too close or too heavily in one spot.
Paint not adhering to the surface
Ensure the surface is clean, dry, and free from oils or contaminants. Use a primer suitable for the model material. Lightly sand the surface before painting.
Pros and Cons
Pros
- Achieves a smooth, even finish on large surfaces.
- Dries quickly to reduce waiting time between coats.
- Provides durable, hard-wearing results.
- Easy to apply with a standard spray can.
- Specific French Blue color is ideal for certain models.
Cons
- Requires good ventilation due to solvent content.
- May require multiple coats for complete opacity depending on the base color.
- Curing time can vary based on environmental conditions.
- Not suitable for use on certain plastics without proper primer.
- Can be messy if not applied carefully.
Setup, Compatibility & Care
Setup:
- Ensure the model surface is clean, dry, and free of dust, grease, and debris. Lightly sand surfaces for better adhesion if necessary.
- Apply a suitable primer if painting on plastic that is not compatible with direct lacquer application.
- Shake the can vigorously for at least one minute after the mixing ball starts to rattle.
Compatibility:
- Tamiya TS spray paints are synthetic lacquers. They are generally compatible with most model plastics when used correctly. Always test on a small, inconspicuous area first.
- Best used with Tamiya primers and putties.
Care:
- Store the can upright in a cool, dry place away from direct sunlight and heat sources.
- After use, invert the can and spray for a few seconds to clear the nozzle and prevent clogging.
- Clean any accidental spills immediately with a suitable solvent (e.g., Tamiya lacquer thinner or isopropyl alcohol).