TYPE-C Cable Tester - Blue
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This TYPE-C Cable Tester is designed for technicians and electronics enthusiasts who need to quickly diagnose issues with USB-C cables. Its key benefit is providing a portable, external-power-free solution for detecting cable faults, allowing for rapid identification of broken pins. A minor caveat is its reliance on a CR2032 button cell battery for operation.
All features
| Colour | Blue |
|---|---|
| Model Part Number | DOESNOTAPPLY |
| Brand | Wella Elements |
Extended Product Information
FAQs
What type of battery does this tester use?
The tester uses one CR2032 button cell battery.
Does this tester come with a battery?
No, the CR2032 button cell battery is not included with the tester and must be purchased separately.
How do I know if a pin is bad?
If a pin is bad or not conducting, the corresponding LED indicator on the tester will not light up. If all pins are conducting, all relevant LEDs should illuminate.
Can this tester diagnose issues with USB-A to USB-C cables?
No, this tester is specifically designed for double-headed Type-C (USB-C) cables only.
What does 'All-pin conduction detection' mean?
It means the tester checks the continuity of all 24 pins present in a standard USB-C connector, providing a comprehensive test of the cable's internal wiring.
Is this tester suitable for testing Thunderbolt cables?
While Thunderbolt cables use the USB-C connector, this tester primarily confirms basic pin continuity. It may not verify all advanced functionalities or bandwidth capabilities specific to Thunderbolt.
How portable is this device?
It is highly portable, measuring just 50x30mm and weighing only 17g, and it operates on a small button cell battery without needing external power.
Troubleshooting
No LEDs light up when the cable is connected
Ensure the CR2032 battery is correctly inserted with the proper polarity. Check if the battery is depleted and replace it if necessary. Verify that both ends of the USB-C cable are fully seated in the tester's ports.
Some LEDs do not light up, or lights flicker intermittently
This indicates a potential break or poor connection in the corresponding pins of the USB-C cable. Try wiggling the cable at the connection points to see if the LED behavior changes. The cable likely needs to be replaced.
All LEDs light up, but the cable still doesn't work
While the tester confirms pin continuity, it cannot test the quality of the internal wires or complex circuitry within the cable. The cable might have internal damage affecting signal integrity or power delivery beyond simple conduction. Consider trying a different, known-good cable.
Pros and Cons
Pros
- Provides on-the-go cable testing without external power.
- Clearly indicates the status of each pin via LED indicators.
- Enables rapid identification of faulty pins in USB-C cables.
- Supports full 24-pin detection for comprehensive testing.
- Extremely small and lightweight for maximum portability.
Cons
- Requires a CR2032 button cell battery, which is not included.
- May not detect intermittent connection issues as reliably as complex diagnostic tools.
- Visual inspection of LEDs is required, which can be less automated than software-based testing.
- Limited to testing USB-C cables; not suitable for other connector types.
Setup, Compatibility & Care
Setup:
- Open the battery compartment on the tester.
- Insert one CR2032 button cell battery, ensuring correct polarity.
- Connect one end of the USB-C cable to one of the tester's USB-C ports.
- Connect the other end of the USB-C cable to the second USB-C port on the tester.
- Observe the LED indicators to check for pin continuity.
Compatibility:
- This tester is specifically designed for double-headed Type-C (USB-C) cables.
- It supports cables designed for fast charging and data transfer.
Care:
- Keep the tester dry and away from moisture.
- Avoid exposing it to extreme temperatures.
- Clean the exterior with a soft, dry cloth. Do not use abrasive cleaners.
- Remove the battery when the device is stored for extended periods to prevent leakage.