Espuma Fabricare Upholstery Cleaner - 5 Litre

Currently unavailable

Currently unavailable
The Espuma Fabricare Upholstery Cleaner is a concentrated, heavy-duty, all-purpose cleaner for automotive interiors. It excels at refreshing and cleaning upholstery, trim, and fabric, leaving a clean, matt finish. While powerful, it requires dilution for optimal use and is best suited for professional detailers or those tackling significant interior cleaning tasks.
| Model Part Number | 0442-05 |
|---|---|
| Brand | Espuma |
For general upholstery and fabric cleaning, a dilution ratio of 1:10 (1 part cleaner to 10 parts water) is typically recommended. Adjustments may be needed based on the level of soiling and fabric type.
Yes, it can be used on fabric headliners. However, due to the delicate nature of headliner adhesive, use a very light mist, minimal agitation, and avoid over-saturation. Blot gently rather than scrubbing.
Mix the diluted solution in a spray bottle. Lightly mist the fabric surface, agitate gently with a soft-bristled brush or microfiber cloth, then blot or extract the residue with a clean microfiber towel or an upholstery extractor.
It is designed for fabric upholstery, carpets, and trim. Always perform a patch test on an inconspicuous area first to confirm compatibility and colorfastness, especially on older or unique materials.
No, the Espuma Fabricare Upholstery Cleaner is designed to leave a natural, matt finish, avoiding any glossy or sticky residue.
This product is specifically formulated for fabric. It is not recommended for use on leather or vinyl. Use dedicated products for those materials.
The lifespan depends on usage frequency and dilution ratios. As a concentrated product, the 5-litre bottle can provide a significant number of cleanings, making it very economical for professional use or for individuals who detail their vehicles regularly.
Ensure the product was adequately diluted. Rinse or blot the area thoroughly with clean water and a microfiber towel after cleaning. Check that you are using clean tools and towels.
Verify the dilution ratio. For heavily soiled areas, you may need a stronger concentration or more agitation with a soft brush. Allow the product to dwell for a short period (30-60 seconds) before agitating.
This is uncommon with this product. Ensure the area is well-ventilated during and after cleaning. Consider using a dedicated automotive air freshener if needed, but the cleaner itself is designed to leave a neutral or fresh scent.
This indicates the fabric may not be colorfast. Perform a spot test in a hidden area before cleaning the entire surface. If color transfer occurs, stop use on that material and consult a professional.
Setup: This product is concentrated and must be diluted before use. A common dilution ratio for general interior upholstery is 1:10 (1 part cleaner to 10 parts water). For tougher stains, a stronger dilution might be considered, but always test in an inconspicuous area first. Mix the required amount in a spray bottle.
Compatibility: Espuma Fabricare Upholstery Cleaner is suitable for most automotive fabric upholstery, carpets, and trim. Always perform a spot test on an inconspicuous area of the material before full application to ensure colorfastness and material compatibility. Avoid using on leather, vinyl, or hard plastic surfaces unless specifically recommended for that material type.
Care: Store the product in its original container in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the cap is tightly sealed after each use. Clean application tools (spray bottles, brushes) thoroughly after use.