Wire Pulling Lubricant - 3M LUB-I 3.78L
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The 3M LUB-I Wire Pulling Lubricant is designed for industrial and professional use, facilitating the smooth and safe pulling of various cable types. Its primary benefit is a significantly reduced coefficient of friction, making tough pulls easier. A key consideration is that this product is intended for workplace applications, not consumer use.
All features
| Model Part Number | LUB-I |
|---|---|
| Brand | 3M |
Extended Product Information
FAQs
Is this lubricant safe for all cable types?
The 3M LUB-I is suitable for a wide variety of cable types including power, control, instrumentation, and communication cables. Its formulation is intended for professional installation and should not degrade cable insulation.
How should I apply the lubricant for best results?
Apply a generous, even coating to the cable jacket or the interior of the conduit before pulling. Using a lubricant applicator can ensure consistent coverage.
Can this product be used in extreme temperatures?
Yes, the lubricant is formulated to endure freezing and high-temperature storage conditions without losing its effectiveness or separating.
What is the intended use of this product?
This product is designed, manufactured, labeled, and packaged for sale to industrial and professional customers for workplace use. It is not intended for consumer sale or use.
How do I clean up the lubricant?
The lubricant is designed for easy clean-up. Typically, a damp cloth is sufficient. For more persistent residue, a mild cleaning solution may be used.
Does the lubricant leave any stains?
No, the lubricant is colorless and non-staining, ensuring surfaces and cables remain clean after application and use.
Troubleshooting
Cable pulling is still difficult despite lubricant application.
Ensure the lubricant was applied evenly and consistently along the entire length of the cable or conduit section. Check for any physical obstructions or sharp bends in the conduit that may be increasing friction.
Lubricant appears to have separated in the container.
This product is designed to endure freezing and high-temperature storage and should not phase separate. If separation is observed, gently shake or stir the product before use. If the issue persists, contact the supplier.
Residue is difficult to remove from a surface.
While designed for easy clean-up, stubborn residue may occur on certain materials. Try using a damp cloth with mild soap or a designated industrial cleaner. Test cleaning solutions on an inconspicuous area first.
Pros and Cons
Pros
- Simplifies and speeds up cable pulling operations.
- Protects cables from damage during installation.
- Maintains effectiveness across a wide temperature range.
- Does not leave unsightly stains or marks.
- Easy to clean from equipment and surfaces.
Cons
- Not intended for consumer or DIY use.
- Requires proper application for optimal performance.
- May require specific cleaning agents for certain surfaces if residue is persistent.
Setup, Compatibility & Care
Application: Apply the lubricant directly to the cable jacket or inside the conduit before pulling. A consistent, even coat is recommended for best results. It can be applied manually or using a specialized lubricant applicator.
Compatibility: The 3M LUB-I is designed to be compatible with a wide range of cable types, including power cables, control cables, instrumentation cables, and communication cables. Its formulation is intended for industrial use and should not cause damage to cable insulation.
Care: Store the lubricant in its original container in a cool, dry place, away from direct sunlight. Ensure the container is tightly sealed when not in use to prevent drying out or contamination. Clean up any spills immediately using absorbent materials. If residue remains on equipment or surfaces, it can typically be removed with a damp cloth or a mild cleaning solution, as it is designed to be easy to clean.